We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat silver 1U vented rack shelf with side brackets, no front lip, 19 inch wide, 6 inch deep

BFKK

BFKK 1U Vented Rack Shelf 19 Inch 6 Inch Deep No Lip

SKU CH-WGJY-ZB9RR

A vented 1U rack shelf, 6 inches deep with no front lip, fits 19-inch cabinets and holds up to 22 pounds

  • TypeRack Shelf
  • Fits every 19-inch rack or cabinet for versatile equipment mounting
  • No front lip saves 1U of vertical rack space
  • Reinforcing rib and 1.2mm thick sides support up to 22 pounds
  • Quick assembly with included M6 and M5 hardware reduces transit damage
  • Shallow 152mm depth suits tight cabinets while holding essential gear

Universal 19-inch rack shelf

This 1U vented tray fits any standard 19-inch rack or cabinet and holds IT, network or other equipment. It ships disassembled to protect the mounting ears during transit and assembles quickly with the included screws and cage nuts. The front has no lip, saving rack space, and a reinforcing rib adds rigidity. Side walls are 1.2mm thick for strength.

For single devices in shallow racks

Suitable for installers who need a lightweight, fixed shelf for one piece of gear in a 6-inch deep opening. The 22-pound load limit and shallow depth rule out heavier appliances, deeper chassis or multi-unit stacking. Buyers who need slide rails, cable-management cut-outs or a higher weight rating should look elsewhere.

22-pound capacity with 152mm depth

The tray comfortably supports modest devices such as patch panels, small switches or a single router within its 22-pound maximum. It runs out of headroom for full-depth servers, UPS units or any equipment exceeding the weight limit or the 6-inch depth. The fixed design also offers no airflow adjustment beyond the vented surface.

Highlights

  • Fits every 19-inch rack or cabinet for versatile equipment mounting
  • No front lip saves 1U of vertical rack space
  • Reinforcing rib and 1.2mm thick sides support up to 22 pounds
  • Quick assembly with included M6 and M5 hardware reduces transit damage
  • Shallow 152mm depth suits tight cabinets while holding essential gear

Specifications

TypeRack Shelf

Questions about this item

What rack standard and depth does the BFKK 1U shelf require for mounting?

It fits any 19 inch rack or cabinet and needs 152 mm of usable depth for the 6 inch deep tray.

Will the 22 pound load limit handle a legacy 1U switch and patch panel together?

Yes, the 1.2 mm thick sides and reinforcing rib are rated for 22 pounds total, enough for typical legacy 1U gear.

How can I confirm the shelf is correctly assembled and level after installation?

Tighten the four included M6 or M5 screw sets until the tray sits flush in the 1U opening with no front lip gap.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.