We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U vented cantilever rack shelf, 152mm deep, disassembled with reversible lip

BFKK

BFKK 1U Vented Cantilever Rack Shelf 152mm Depth 44lb Capacity

SKU CH-2VAC-F6GXK

A disassembled 1U vented cantilever shelf fits 19-inch racks, holds up to 44 pounds and adjusts lip orientation for flexible mounting

  • TypeRack Shelf
  • Fits every 19-inch rack or cabinet for flexible equipment mounting
  • Disassembled design lets you flip the lip up or down to suit different gear
  • 2 mm thick side rails support up to 44 pounds for sturdy storage
  • Ships disassembled to protect mounting ears from transit damage
  • Includes both M6 and M5 hardware for quick 1U installation

1U Vented Cantilever Shelf for 19-Inch Racks

This 1U vented cantilever shelf mounts in any 19-inch rack or cabinet to hold IT, network or AV equipment. The open design promotes airflow around the devices while keeping the installation footprint to a single rack unit. It ships disassembled so you can configure the lip orientation to suit different mounting needs. Builders who need deeper support for heavy chassis should look elsewhere.

44 lb Capacity with 1.2 mm Side Walls

The load-bearing sides are 1.2 mm thick and rated for a maximum of 44 pounds, which is the key figure for deciding whether your hardware is within safe limits. The vented steel surface distributes weight across the full 152 mm depth. Equipment that exceeds this rating or requires a deeper mounting surface will not be supported safely.

Tool-Less Lip Orientation and Included Fasteners

Assembly is straightforward: the shelf arrives in pieces with four M6 screws, four M6 cage nuts, four M5 screws and four M5 nuts included. The lip can be installed facing up or down depending on cable routing or retention preferences. The disassembled packaging reduces transit damage to the mounting ears, but installers must remember to tighten all fasteners evenly to prevent rack misalignment.

Highlights

  • Fits every 19-inch rack or cabinet for flexible equipment mounting
  • Disassembled design lets you flip the lip up or down to suit different gear
  • 2 mm thick side rails support up to 44 pounds for sturdy storage
  • Ships disassembled to protect mounting ears from transit damage
  • Includes both M6 and M5 hardware for quick 1U installation

Specifications

TypeRack Shelf

Questions about this item

How much equipment weight can the 44 lb capacity actually hold once the shelf is mounted?

The shelf is rated for a maximum loading weight of 44 pounds, suitable for IT, network and AV equipment.

What rack standard does the 19 inch compatibility refer to and what depth does it support?

It fits all 19 inch racks and cabinets with a shelf depth of 6 inches (152 mm).

What hardware is included for mounting the 1U shelf to the rack posts?

Four M6 screws with cage nuts and four M5 screws with nuts are supplied for installation.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.