We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vented cantilever rack shelf, 1U, 10 inch depth, silver metal finish

BFKK

BFKK 1U Vented Cantilever Rack Shelf 10" (254mm) Depth

SKU CH-X8YN-VG365

A disassembled 1U cantilever shelf for 19-inch racks, 254 mm deep, with reversible lip and 44 lb capacity

  • TypeRack Shelf
  • Fits every 19-inch rack or cabinet for flexible equipment mounting
  • 1U height and 254 mm depth keep the shelf compact
  • 5 mm thick sides support up to 44 pounds of gear
  • Disassembled design lets you flip the lip up or down for different uses
  • Includes 4 M6 screws with cage nuts and 4 M5 screws with nuts

1U Vented Cantilever Shelf for 19-Inch Racks

This 1U rack shelf mounts in any standard 19-inch cabinet to hold IT, network or AV equipment. The vented steel deck promotes airflow around mounted devices. It is supplied disassembled so the installer can orient the retaining lip upward or downward to suit the load. Maximum load capacity is 44 pounds.

Simple Assembly With Included Hardware

The package contains four M6 screws with cage nuts and four M5 screws with nuts for direct mounting to 19-inch rack rails. Side panels are 1.5mm thick for rigidity. Because the shelf ships flat, transit damage to the mounting ears is reduced. No special tools are required beyond a screwdriver or nut driver.

Suits Shallow-Cabinet Installations

The 10-inch (254mm) depth fits compact racks where deeper shelves would not clear rear doors or cable managers. It is ideal for patch panels, small switches or audio gear that need front access only. Builders requiring deeper support for full-length servers or heavy appliances should consider a full-depth shelf instead.

Highlights

  • Fits every 19-inch rack or cabinet for flexible equipment mounting
  • 1U height and 254 mm depth keep the shelf compact
  • 5 mm thick sides support up to 44 pounds of gear
  • Disassembled design lets you flip the lip up or down for different uses
  • Includes 4 M6 screws with cage nuts and 4 M5 screws with nuts

Specifications

TypeRack Shelf

Questions about this item

How do I verify the shelf holds equipment securely after mounting it in a 19-inch rack?

The 1.5 mm thick holding sides are rated for a maximum loading weight capacity of 44 pounds, so the shelf should remain rigid when loaded within that limit.

Which fasteners are included and is any additional hardware required for a standard 19-inch rack?

The package supplies 4 M6 screws with cage nuts and 4 M5 screws with nuts, covering the two common thread types for 19-inch rack mounting; no extra hardware is needed.

Should I choose the lip-up or lip-down orientation for my 10-inch deep cantilever shelf?

The lip can be installed either upside or downside, so select lip-up to prevent gear from sliding forward or lip-down for a flush front edge depending on your equipment.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.