We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal sliding rails with cable bar, 1U height, adjustable depth 10 to 31.75 inches

BFKK

BFKK 1U 4-Post Universal Rack Rail Kit with Cable Management Bar

SKU CH-ATWE-90HJ2

Universal 1U rail kit supports servers, switches and UPS units up to 45 lbs in 19-inch 4-post racks with adjustable 10 to 31.75 inch depth

  • TypeRack Rails
  • Supports servers up to 45 lbs with 18-gauge zinc-plated steel
  • Fits Dell, HPE, Lenovo, IBM and Supermicro without OEM rails
  • Adjustable depth from 10 to 31.75 inches for any 4-post rack
  • Works with 10-32, 12-24 and square-hole 19-inch cabinets
  • Includes cable management bar to keep wiring tidy

Universal 1U 4-Post Rail Kit

This 1U universal rackmount rail kit supports rack mounted equipment such as servers, switches and UPS systems. It serves as an alternative to mounting ears or OEM server rails and is compatible with all major rack servers including Dell PowerEdge, HPE, Lenovo, IBM and Supermicro. The kit fits standard 19-inch 4-Post racks and cabinets.

Zinc-Plated 18-Gauge Steel Construction

Constructed from durable zinc plated 18-Gauge cold-rolled steel, the rails support equipment weighing up to 45 lbs (20 kgs). Compatible mounting holes include 10-32, 12-24 and standard universal square holes. A cable management bar is included to help organise cabling within the rack.

Adjustable Depth From 10 to 31.75 Inches

The mounting depth adjusts between 10 and 31.75 inches (254 - 806 mm) to accommodate varying chassis lengths. This range allows the same kit to secure short switches and deeper servers in the same rack row. The steel construction maintains rigidity across the full extension without permanent deformation.

Highlights

  • Supports servers up to 45 lbs with 18-gauge zinc-plated steel
  • Fits Dell, HPE, Lenovo, IBM and Supermicro without OEM rails
  • Adjustable depth from 10 to 31.75 inches for any 4-post rack
  • Works with 10-32, 12-24 and square-hole 19-inch cabinets
  • Includes cable management bar to keep wiring tidy

Specifications

TypeRack Rails

Questions about this item

How do I install the rail kit in a 19-inch 4-post rack with square holes?

Slide the inner rails onto the equipment sides, then bolt the outer rails to the front and rear square holes using the included cage nuts and screws, adjusting the depth between 254 and 806 mm before tightening all fasteners.

Will the zinc-plated 18-gauge cold-rolled steel rails or the cable management bar need periodic replacement?

The rails and bar are built from zinc-plated 18-gauge cold-rolled steel for corrosion resistance and do not have a scheduled replacement interval; inspect mounting screws annually and retighten if vibration has loosened them.

At what load does the 45 lb (20 kg) weight limit become the limiting factor during continuous operation?

The 45 lb (20 kg) rated capacity is the structural limit; exceeding it risks rail deflection or mounting-hole damage, so keep the installed equipment at or below that weight for sustained use.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.