We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12U wall-mount server rack, glass front door, two fans, hinged rear gate, 450mm depth

BFKK

BFKK 12U Wall-Mount Server Rack 450mm Depth Hinged Back

SKU CH-SBTS-CDBJD

Wall-mount 12U server rack holds 19-inch IT gear, swings open for rear access and includes two fans, lockable panels and 200 lb capacity

  • TypeRack Mount Cabinet
  • Holds 12U of 19-inch gear in a compact wall-mount frame
  • 200 lb load rating on 16-gauge cold-rolled steel with powder coat
  • Two built-in fans provide active airflow to prevent overheating
  • Lockable front door, side panels and hinged back gate secure equipment
  • Hinged swing gate and removable panels simplify rear access and cable routing

12U Wall-Mount Cabinet for 19" Gear

This 12U wall-mount cabinet holds 19-inch IT equipment, A/V devices and patch panels in spaces where floor room is limited. It suits network closets, retail sites, schools and home offices that need secure, accessible rack mounting. The hinged back swings away from the wall for rear cabling access during and after installation. Adjustable vertical rails let you position gear in 7/8-inch increments.

Cold-Rolled Steel Build with Locks and Fans

The enclosure uses 16-gauge cold-rolled steel with a black powder-coated finish and supports up to 200 lbs of equipment. Two built-in fans move air through the cabinet to reduce overheating risk. Lockable front glass door, removable side panels and a hinged rear gate secure hardware from tampering. Removable top and bottom panels simplify cable routing and maintenance.

EIA-310-E Compliant with Limited Rail Depth

The rack follows EIA/ECA-310-E spacing so standard 19-inch gear fits correctly. Maximum rail depth is 11.81 inches, which restricts the length of servers or switches you can install. Overall dimensions are 25.07 x 23.63 x 17.72 inches, so verify wall clearance before mounting. Buyers needing deeper chassis or higher load ratings will need a different solution.

Highlights

  • Holds 12U of 19-inch gear in a compact wall-mount frame
  • 200 lb load rating on 16-gauge cold-rolled steel with powder coat
  • Two built-in fans provide active airflow to prevent overheating
  • Lockable front door, side panels and hinged back gate secure equipment
  • Hinged swing gate and removable panels simplify rear access and cable routing

Specifications

TypeRack Mount Cabinet

Questions about this item

Does the EIA-310-E 19-inch rail spacing limit the depth of equipment I can install?

The adjustable vertical rails support a maximum depth of 11.81 inches, so any 19-inch device deeper than that will not fit.

What wall fixings and clearances are required for the 450 mm deep hinged cabinet?

The unit measures 25.07 x 23.63 x 17.72 inches overall; allow swing clearance for the hinged back gate and use fixings rated for the 200 lb load limit.

How do I mount the cabinet so the hinged back swings freely after installation?

Secure the wall-mount bracket to studs or masonry first, hang the cabinet, then verify the rear gate opens fully before tightening the final locking screws.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.