We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
12U wall-mount 19-inch server rack 450mm depth glass front door steel frame

BFKK

BFKK 12U 19" Wall Mount Server Rack 450mm Depth

SKU CH-ADKQ-2DY4S

A 12U wall-mountable 19-inch cabinet with 450mm depth, 1.2mm steel frame, locking glass door, removable side panels, two built-in fans and 130lb load capacity

  • TypeRack Mount Cabinet
  • 12U capacity fits standard 19" rack equipment
  • 450mm depth accommodates deeper servers and switches
  • 130 lb weight capacity supports heavy hardware loads
  • 2 mm cold-rolled steel welded frame ensures rigidity
  • Two built-in fans provide active cooling airflow

12U 19-inch wall-mount rack for small deployments

This 12U enclosure accepts standard 19-inch rack equipment and can be wall-mounted or used free-standing. It suits offices, branch locations or home labs that need secure, space-efficient housing for network switches, patch panels or shallow servers. The cabinet arrives flat-packed and requires assembly.

450mm depth limits equipment length

At 450mm (17.72 inches) deep, the cabinet only fits devices shorter than that clearance; deeper servers or UPS units will not install. The welded 1.2mm steel frame carries up to 130 pounds total load, so combined equipment weight must stay within that figure. Two built-in fans provide active airflow, but no filter or ducting provisions are described.

Cage-nut rails and lockable glass door secure gear

Rails use cage-nut bolting compatible with standard 19-inch mounting hardware, and the tempered glass front door plus removable side panels all lock. The supplier states the enclosure meets PCI and HIPAA physical-security requirements, making it a candidate for regulated environments that need auditable access control.

Highlights

  • 12U capacity fits standard 19" rack equipment
  • 450mm depth accommodates deeper servers and switches
  • 130 lb weight capacity supports heavy hardware loads
  • 2 mm cold-rolled steel welded frame ensures rigidity
  • Two built-in fans provide active cooling airflow

Specifications

TypeRack Mount Cabinet

Questions about this item

How do I decide between the 12U height and the 450mm depth for my wall-mounted setup?

The cabinet provides 12U of vertical rack space and a 450mm deep interior, so match the U-count to your device stack and confirm each item fits within the 450mm depth before mounting.

What does the 130 pound weight capacity mean once the rack is bolted to the wall?

The welded 1.2 mm steel frame is rated to hold 130 pounds of installed equipment when properly secured to wall studs, covering servers, switches and patch panels combined.

How does the 19-inch cage-nut rail standard limit what I can install?

The rails accept any EIA-compliant 19-inch gear using cage nuts, so equipment width is fixed at 19 inches while depth must stay inside the 450mm cabinet envelope.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.