We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA III cables, 18 inch, straight locking connectors

BENFEI 000219black-3p SATA III cable 3-pack 18 inch black

SKU CH-PVBR-301B2

Three SATA III cables with locking latches provide 6 Gbps data links for 2.5" SSDs, 3.5" HDDs and optical drives

  • TypeSATA III
  • ColorBlack
  • Length45.7
  • Connector DetailSata III
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • Up to 6 Gbps transfer with SATA 3.0 support
  • Locking latch on each end secures the connection
  • 18 inch length fits standard internal drive bays
  • Three cables in one pack for multiple devices
  • Backwards compatible with SATA I and SATA II

Three-cable SATA III kit

This BENFEI 000219black-3p pack supplies three 18-inch SATA III cables for linking motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable uses a male-to-male design with a locking latch to keep the connection firm during data transfers. The black finish helps the cables blend into dark chassis interiors.

6 Gbps sustained throughput

Rated at 6 Gbps under the SATA 3.0 revision, the cables maintain that bandwidth across the full 45.7 cm length rather than only in short bursts. Copper conductors and the locking latch reduce signal loss when drives run continuous read or write workloads. Backward compatibility with SATA I and II means older drives still operate at their rated speeds.

Data-only connection

These cables carry data only and do not deliver power to the attached drive, so a separate power cable from the power supply is required for every device. Buyers who need a combined power-and-data lead or an angled connector for tight clearances will need a different product.

Highlights

  • Up to 6 Gbps transfer with SATA 3.0 support
  • Locking latch on each end secures the connection
  • 18 inch length fits standard internal drive bays
  • Three cables in one pack for multiple devices
  • Backwards compatible with SATA I and SATA II

Specifications

BrandBENFEI
Model000219black-3p
TypeSATA III
ColorBlack
Length45.7
Connector DetailSata III
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

Does the 6 Gbps SATA III cable generate noticeable heat or noise during continuous all-day operation?

No, the passive copper conductors carry only data signals and draw negligible power, so the cables run silently and stay at ambient temperature even under constant 6 Gbps throughput.

What separate component must already be installed to power the drives connected with these cables?

Each drive requires its own SATA power connector from the PSU; the 18-inch data cables provide only the 7-pin signal link and deliver no power.

Will the locking-latch SATA III cables work reliably with older SATA I or SATA II hard drives and optical drives?

Yes, the 6 Gbps cables are fully backwards compatible and will negotiate the maximum speed supported by the legacy drive, while the locking latch ensures a secure fit on any standard 7-pin port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.