Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Belkin
10 ft aqua duplex cable connects LC multimode links with 50/125 µm cores and 2.5 dB/km loss at 850 nm
This 10 ft aqua patch cable uses 50/125 µm multimode fibre with LC connectors on both ends. It suits installers linking switches, patch panels or transceivers in enterprise or campus LANs. The duplex construction carries two fibres for full-duplex links. Buyers needing single-mode fibre or longer runs should choose a different cable type.
Maximum attenuation is rated at 2.5 dB/km at 850 nm and 0.7 dB/km at 1310 nm. Minimum return loss reaches 20 dB at both wavelengths, keeping reflections low for stable 10 Gbit/s transmission. The 3 mm outer jacket protects the fibres during routing and termination. No active components mean zero power draw and silent operation.
Four LC connectors — two per end — are factory polished for reliable mating. The aqua jacket identifies 50/125 µm multimode grade at a glance and is backward compatible with 62.5/125 µm equipment. The 3 mm diameter allows dense patch-panel routing without snagging. Installers requiring SC, ST or MPO interfaces will need alternative cables.
| Brand | Belkin |
|---|---|
| Model | F2F402LL-03M-G |
| Type | Others |
| Color | Aqua |
| Length | 10 ft. |
| Connector Number | 4 |
| Connector Detail | Connector A: LC Connector B: LC |
| Specifications | Core/Cladding Diameters: 50mm/125mm Max Attenuation (dB/km) at 850nm/1310nm: 2.5/0.7 Minimum Return Loss @ 850nm/1310nm: 20dB/20dB Outer Diameter: 3mm |
| Features | Belkin's 10GB Aqua Fiber Optic Cables are backward-compatible with existing network equipment and provide close to triple the bandwidth of traditional 62.5/125 multimode fiber. 10 Gigabit is rated for distances of up to 300 meters using 850nm Vertical Cavity Surface Emitting Lasers (VCSELs). |
| Shipping weight | 0.23 kg |
| Package size | 201 × 114 × 23 mm |
Insert each LC connector until the latch clicks; the step people miss is removing the dust caps and cleaning the ferrule end-faces with a lint-free wipe and isopropyl alcohol before mating.
Periodically inspect and clean both LC ferrule end-faces with a fibre scope and approved cleaning tools; replace the patch cord if return loss drops below 20 dB at 850 nm or 1310 nm or if the aqua jacket shows cuts or kinks.
Attenuation of 2.5 dB/km at 850 nm limits the practical 10 Gbps reach; the 10 ft length stays well within that budget, so the first limit is usually connector contamination rather than fibre loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?