We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Belkin 32.8 ft duplex multi-mode fibre patch cable with LC and ST connectors

Belkin

Belkin F2F402L0-10M fibre optic cable 32.8 ft LC/ST multi-mode 50/125 µm

SKU CH-YQED-E60BA MPN F2F402L0-10M

A 32.8 ft duplex multi-mode patch cable with 50/125 µm core, LC male to ST male connectors for network links

  • TypeOthers
  • Length32.80 ft
  • Connector Number1
  • Connector DetailConnector on First End:2 x LC Male Connector on Second End:2
  • FeaturesCable Characteristic:Patch Cable Packaged Quantity:1
  • 8 ft reach links equipment across racks
  • Duplex LC to ST connects mismatched transceivers
  • Multi-mode 50/125 µm supports short-range networks
  • Patch-cable construction simplifies rack-to-panel routing
  • Light 4.80 oz weight eases cable management

Patch cable for network devices

The Belkin F2F402L0-10M is a duplex fibre optic patch cable built for network device connections. It uses multi-mode fibre with a 50/125 µm core and cladding diameter. The 32.8 ft length links equipment across racks or rooms. Both ends are terminated for immediate use.

Suits installers needing LC-to-ST links

Technicians who need to connect LC male ports to ST male ports on multi-mode infrastructure will find the correct ends on one cable. Builders who require single-mode fibre, a different core diameter, or other connector types such as SC or MTP must source a different cable. The single packaged unit covers one duplex run.

Multi-mode 50/125 µm fibre type

The core and cladding diameter of 50/125 µm determines which transceivers and patch panels the cable supports. Multi-mode optics designed for this specification will operate correctly. Equipment that demands single-mode or a different core size will not work with this cable.

Highlights

  • 8 ft reach links equipment across racks
  • Duplex LC to ST connects mismatched transceivers
  • Multi-mode 50/125 µm supports short-range networks
  • Patch-cable construction simplifies rack-to-panel routing
  • Light 4.80 oz weight eases cable management

Specifications

BrandBelkin
TypeOthers
Length32.80 ft
Connector Number1
Connector DetailConnector on First End:2 x LC Male
Connector on Second End:2 x ST Male
FeaturesCable Characteristic:Patch Cable
Packaged Quantity:1
Shipping weight0.16 kg
Package size216 × 203 × 183 mm

Questions about this item

Does the 32.8 ft length add noticeable signal loss for a multi-mode 50/125 µm run?

At 32.8 ft the insertion loss on 50/125 µm multi-mode fibre is negligible for typical LAN speeds; the duplex LC/ST patch cord is designed for short-range links.

What ports must my switch and patch panel provide for the LC and ST connectors?

You need two LC receptacles on one side and two ST receptacles on the other; each connector is male so the equipment side must be female.

Will the duplex LC/ST ends fit the older ST-only transceivers I still use?

The cable terminates in two ST males on the second end, so it plugs directly into legacy ST ports; the first end uses two LC males for newer gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.