We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DVI-I to VGA cable, 3 ft, 23-pin to 15-pin connectors

Belkin

Belkin F2E0162-03-SV DVI-I Single Link to HD-15 VGA cable 3 ft

SKU CH-0SME-0Y13Y MPN F2E0162-03-SV

Connects a DVI-I single-link source to a VGA display with 23-pin and 15-pin connectors over 3 ft

  • TypeDVI to VGA
  • ColorBlack
  • Cable Length3 ft.
  • Connector Number2
  • Connector DetailDVI-I (Single Link) to HD-15
  • SpecificationsConnector A : 23 pin DVI-Integrated (Single-Link) Connector
  • Connect DVI-I sources to VGA displays using a 23-pin DVI-I single-link connector and a 15-pin HD-15 port
  • Three-foot cable length suits short desk runs and keeps clutter minimal
  • Black finish matches most monitor and graphics-card aesthetics
  • Two-connector design carries analog video without active conversion or external power
  • Belkin build quality with tough-yet-flexible casing for reliable daily use

3 ft DVI-I to VGA cable

This 3 ft Belkin cable carries a DVI-I Single Link connector on one end and a 15 pin HD-15 VGA connector on the other. The black jacket protects 23 pin DVI-Integrated wiring for analogue video transmission. It suits legacy monitors or projectors that accept only a VGA input.

Suitable for single-link analogue sources

The cable works with any source that outputs analogue video through a DVI-I port and any display with a VGA input. It will not carry a digital signal, so systems that require DVI-D or dual-link bandwidth should use a different cable. Builders needing audio or longer runs must look elsewhere.

DVI-I Single Link analogue only

The 23 pin DVI-I Single Link connector passes only analogue RGBHV signals to the 15 pin HD-15 plug. No digital TMDS lanes are connected, so the link cannot drive a digital display or exceed single-link resolution limits.

Highlights

  • Connect DVI-I sources to VGA displays using a 23-pin DVI-I single-link connector and a 15-pin HD-15 port
  • Three-foot cable length suits short desk runs and keeps clutter minimal
  • Black finish matches most monitor and graphics-card aesthetics
  • Two-connector design carries analog video without active conversion or external power
  • Belkin build quality with tough-yet-flexible casing for reliable daily use

Specifications

BrandBelkin
ModelF2E0162-03-SV
TypeDVI to VGA
ColorBlack
Cable Length3 ft.
Connector Number2
Connector DetailDVI-I (Single Link) to HD-15
SpecificationsConnector A : 23 pin DVI-Integrated (Single-Link)
Connector B : 15 pin HD D-Sub (HD-15)
Shipping weight0.68 kg
Package size152 × 127 × 23 mm

Questions about this item

What does the single-link DVI-I connector mean for the video signal on this cable?

The single-link DVI-I connector carries an analogue signal through its 23 pins to the 15-pin HD-15 plug, so a VGA monitor receives the native analogue output from a DVI-I source.

How does the DVI-I single-link interface limit what I can connect?

Only the analogue pins of the DVI-I single-link connector are used, so the cable works with DVI-I or DVI-A sources but cannot transmit a digital-only DVI-D signal to the VGA side.

Will the 3 ft length and connector shape fit behind a typical desktop PC?

At 3 ft the black cable reaches from a rear-panel DVI-I port to a nearby VGA monitor, and the 23-pin DVI-I plug with thumb screws secures to the 15-pin HD-15 socket without blocking adjacent ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.