We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat 6 bulk ethernet cable on spool, 1000 ft, solid 24AWG conductors

Belkin

Belkin A7L704-1000-BLU Cat 6 network ethernet cable 1000 ft blue

SKU CH-TMAS-S0TVE MPN A7L704-1000-BLU

A 1000 ft Cat 6 bulk cable with solid 24 AWG conductors and pair separator for Gigabit Ethernet and 1.2 Gbps ATM runs

  • TypeAccessories - Cable Management
  • Cat6
  • Connector ABare Wire
  • Connector BBare Wire
  • Length1000 ft.
  • ColorBlue
  • Supports Gigabit Ethernet with Cat 6 performance
  • 1000 ft length enables full-building cable runs
  • Blue jacket simplifies cable identification in racks
  • Solid 24 AWG conductors ensure reliable signal transmission
  • Meets TIA/EIA-568-B.2-1 and ISO/IEC 11801 standards

Bulk Cat 6 cable for structured wiring

This Belkin A7L704-1000-BLU is a 1000 ft reel of Category 6 network cable with bare-wire ends on both sides. It is built for installers and IT teams pulling permanent links through walls, ceilings or conduit. The blue jacket simplifies colour-coded identification in multi-service environments.

Suited to installers terminating their own ends

The solid 24 AWG conductors and internal pair separator meet TIA/EIA-568-B.2-1 and ISO/IEC 11801 requirements for Gigabit Ethernet and 1.2 Gbps ATM. Buyers who need a ready-made patch cord with factory-fitted connectors should choose a different product.

Bare-wire construction defines the use case

Both ends are bare wire, so the cable must be cut to length and terminated with keystone jacks, patch panels or field-termination plugs on site. This single attribute determines whether the reel fits the installation workflow.

Highlights

  • Supports Gigabit Ethernet with Cat 6 performance
  • 1000 ft length enables full-building cable runs
  • Blue jacket simplifies cable identification in racks
  • Solid 24 AWG conductors ensure reliable signal transmission
  • Meets TIA/EIA-568-B.2-1 and ISO/IEC 11801 standards

Specifications

BrandBelkin
ModelA7L704-1000-BLU
TypeAccessories - Cable Management
Cat6
Connector ABare Wire
Connector BBare Wire
Length1000 ft.
ColorBlue
ShieldedNo
FeaturesSold as 1 Each.
Shipping weight12.13 kg
Package size406 × 406 × 210 mm

Questions about this item

Does the 1000 ft Cat 6 reel need conduit or a specific bend radius for in-wall runs?

The cable uses eight solid 24 AWG conductors with a pair separator; follow TIA/EIA-568-B.2-1 guidelines for bend radius and support spacing when pulling through conduit or cable trays.

What is the correct way to terminate the bare-wire ends on this Cat 6 cable, and what mistake should I avoid?

Strip each 24 AWG solid conductor, untwist pairs only at the termination point, and punch down to T568A or T568B pattern; the common error is untwisting too far back, which degrades the 1.2 Gbps ATM and Gigabit Ethernet performance.

After installation, what maintenance or replacement should I plan for with this unshielded Cat 6 cable?

No scheduled maintenance is required; inspect for physical damage if network errors appear, and replace any section that fails certification to ISO/IEC 11801 or shows jacket cracks from pulling tension.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.