We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Belkin Cat6 UTP patch cable with RJ45 connectors, 10 ft long

Belkin

Belkin A3L980-10-YLW-S Cat6 network ethernet cable 10 ft yellow

SKU CH-X7Q2-96SEY MPN A3L980-10-YLW-S

Cat6 UTP patch cable with RJ-45 male connectors on both ends, 10 ft long in yellow for structured cabling infrastructure

  • TypeHardware Connectivity
  • Cat6
  • Length10 ft.
  • ColorYellow
  • ShieldedNo
  • FeaturesCabling components designed and tested to support existing C
  • Cat6 rating supports Gigabit Ethernet speeds
  • 10 ft length fits typical desk-to-wall runs
  • Yellow jacket makes the cable easy to spot
  • Unshielded twisted-pair design keeps installation simple
  • RJ-45 male connectors plug straight into standard ports

Cat6 patch cable for structured wiring

This Belkin Cat6 UTP patch cable is built for connecting network devices within an existing Cat6 cabling system. The ten‑foot length suits typical desk‑to‑patch‑panel or switch‑to‑wall‑plate runs in offices and home labs. Yellow jacketing makes the link easy to trace among other cables. Both ends terminate in standard RJ‑45 male plugs for a secure snap‑in connection.

Upgrade from Cat5e when noise immunity matters

Moving to this Cat6 cable improves transmission performance and reduces retransmissions compared with older Cat5e links. The jump is worth it when the installation already uses Cat6 structured wiring and you need superior immunity from external noise. It will not add bandwidth beyond the Cat6 rating, so environments that require Cat6a or higher shielding gain no extra headroom from this cable.

Ten‑foot unshielded run with standard headroom

The cable comfortably handles Gigabit Ethernet traffic across its full ten‑foot span with fewer lost packets than lower‑category alternatives. Headroom runs out when the channel length exceeds the Cat6 maximum or when the environment demands shielded construction for high‑interference areas. For longer permanent links or PoE loads beyond the Cat6 spec, a higher‑category or shielded cable is required.

Highlights

  • Cat6 rating supports Gigabit Ethernet speeds
  • 10 ft length fits typical desk-to-wall runs
  • Yellow jacket makes the cable easy to spot
  • Unshielded twisted-pair design keeps installation simple
  • RJ-45 male connectors plug straight into standard ports

Specifications

BrandBelkin
ModelA3L980-10-YLW-S
TypeHardware Connectivity
Cat6
Length10 ft.
ColorYellow
ShieldedNo
FeaturesCabling components designed and tested to support existing CAT6 structured cabling infrastructure.
Improved transmission performance, superior immunity from external noise, fewer retransmission, and fewer lost packets.
Shipping weight0.45 kg
Package size203 × 152 × 23 mm

Questions about this item

What connector size does the Belkin A3L980-10-YLW-S use for the RJ-45 ports?

It uses standard RJ-45 male connectors on both ends, which fit any 8P8C jack found on routers, switches, PCs and patch panels.

Which step do installers often skip when seating the plugs?

Pushing each connector in until the tab clicks, otherwise the link stays down or negotiates at a lower speed.

When should this Cat6 UTP patch cable be replaced?

Replace it if the jacket is kinked, the clip snaps off, or intermittent errors appear after moving furniture or equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.