Belkin
Belkin A3L791B25 Cat5E network ethernet cable 25 ft
A 25 ft Cat5E patch cable with RJ-45 connectors for 10/100 Base-T networks
- TypeConsumer Electronics
- Cat5E
- Length25 ft.
- ColorGray
- ShieldedNo
- FeaturesConnector on First End: 1 x RJ-45 Male Connector on Second E
- Cat 5E rating supports 10/100 Base-T networks
- 25 ft length spans rooms without extra joiners
- Copper conductors deliver reliable signal transfer
- PowerSum testing confirms performance meets spec
- Gray jacket enables quick cable-run identification
Cable category and length
This Belkin patch cable is rated Category 5E and measures 25 ft. It uses copper conductors and terminates in RJ-45 male connectors on both ends. The cable is unshielded and finished in a gray jacket for easy identification in cable runs.
How it fits into a network
It connects any device with an RJ-45 port — such as a desktop, router, switch or patch panel — to a wired Local Area Network. The 25 ft length gives flexibility for routing across a room or through trunking without excess slack. No shielding means it installs quickly in low-interference environments.
Sustained-load behaviour
PowerSum testing confirms the cable meets Category 5E specifications for continuous data transmission. The copper conductors and durable jacket maintain signal integrity over extended use in 10/100 Base-T networks. It is not suited for applications requiring shielded cabling or higher-category bandwidth.
Highlights
- Cat 5E rating supports 10/100 Base-T networks
- 25 ft length spans rooms without extra joiners
- Copper conductors deliver reliable signal transfer
- PowerSum testing confirms performance meets spec
- Gray jacket enables quick cable-run identification
Specifications
| Brand | Belkin |
|---|---|
| Model | A3L791B25 |
| Type | Consumer Electronics |
| Cat | 5E |
| Length | 25 ft. |
| Color | Gray |
| Shielded | No |
| Features | Connector on First End: 1 x RJ-45 Male Connector on Second End: 1 x RJ-45 Male Conductor: Copper PowerSum tested |
| Shipping weight | 0.91 kg |
| Package size | 196 × 175 × 23 mm |
Questions about this item
Will the copper conductors maintain signal integrity over the full 25 ft run?
The cable meets or exceeds Category 5e specifications and is PowerSum tested, so the copper conductors are verified for reliable signal transfer across the entire 25 ft length.
Does the unshielded gray jacket stay cool and silent during continuous 100 Base-T traffic?
As a passive copper patch cable with no active components, it generates no heat and makes no noise regardless of how long 10/100 Base-T data flows through it.
Do I need RJ-45 ports on both devices to use this cable?
Yes, each end terminates in an RJ-45 male connector, so both the source and destination must provide a standard RJ-45 jack for the cable to plug in.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



