We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Belkin

Belkin A3L791-10-BLU-S network ethernet cable 10 ft Cat 5e blue

SKU CH-TRQ9-E69X7 MPN A3L791-10-BLU-S

A 10 ft Cat 5e patch cable with snagless RJ-45 connectors and 50-micron gold plating for 10 and 100 Base-T networks

  • TypeCategory 5e
  • Cat5E
  • Length10 ft.
  • ColorBlue
  • ShieldedNo
  • FeaturesExceeds the performance requirement of Category 5e. Perfect
  • Snagless moulded boot protects the connector clip during installation
  • 10 ft length suits typical desk-to-wall or patch-panel runs
  • Cat 5e rating supports 10 and 100 Base-T networks
  • 50-micron gold-plated contacts maintain clean signal transmission
  • Blue jacket colour simplifies cable identification in busy racks

Cat 5e 10 ft patch cable

This Belkin A3L791-10-BLU-S is a Category 5e patch cable with RJ-45 male connectors on both ends. It measures ten feet and uses a blue unshielded jacket. The moulded boots are snagless and the contacts carry 50-micron gold plating.

Suits 10/100 Base-T links; not for gigabit runs

The specification lists 10 and 100 Base-T networks as the supported environment. Builders wiring gigabit or faster segments should select a higher-category cable. Home users connecting routers, switches or older NICs at 100 Mbps will find the length and snagless ends convenient.

Category 5e rating defines the use case

The single specification that decides fit is the Cat 5e classification. It guarantees performance up to 100 MHz bandwidth for 100 Base-T traffic. If the installation requires certified gigabit or 10 GbE throughput, this cable does not meet that requirement.

Highlights

  • Snagless moulded boot protects the connector clip during installation
  • 10 ft length suits typical desk-to-wall or patch-panel runs
  • Cat 5e rating supports 10 and 100 Base-T networks
  • 50-micron gold-plated contacts maintain clean signal transmission
  • Blue jacket colour simplifies cable identification in busy racks

Specifications

BrandBelkin
ModelA3L791-10-BLU-S
TypeCategory 5e
Cat5E
Length10 ft.
ColorBlue
ShieldedNo
FeaturesExceeds the performance requirement of Category 5e.
Perfect in conjunction with 10 and 100 Base-T networks.
50-micron gold plated connectors to insure a clean and clear transmission.
This product is guaranteed for life!
Premium snagless-type moldings to protect the connection.
PowerSum tested.
Shipping weight0.10 kg
Package size119 × 110 × 37 mm

Questions about this item

Will the 10 ft length reach my router and desktop without strain?

The cable measures 10 ft end to end, so measure the path between your RJ-45 ports to confirm it reaches without pulling tight.

How do I plug the RJ-45 connectors in without damaging the snagless tabs?

Press the connector straight in until the latch clicks; the molded snagless boot protects the tab, but angling the plug can still bend it.

When should I replace the cable if the gold-plated contacts wear?

Replace it if you see intermittent link lights or packet loss on 10/100 Base-T networks, which signals contact degradation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.