We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Belkin

Belkin A3L791-03-WHT Cat 5e network ethernet cable 3 ft White

SKU CH-4BQ3-MDMNE MPN A3L791-03-WHT

Category 5e patch cable with RJ45 connectors, 3 ft length and 24 AWG stranded copper conductors

  • TypeConsumer Electronics
  • Cat5E
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorWhite
  • Category 5e rating supports 100 MHz bandwidth
  • 3 ft length keeps short runs tidy
  • 24 AWG stranded copper conductors ensure flexibility
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • White jacket simplifies cable identification

Cat 5e patch cable, 3 ft

This Belkin A3L791-03-WHT cable is a Category 5e patch cord with RJ45 male connectors on both ends. It uses bare stranded copper conductors sized at 24AWG across four pairs and features 50 micron gold-plated contacts. The jacket is white and the assembly weighs approximately 1.28 oz. It is suited for connecting network devices over short distances.

Home and office runs under 3 ft.

The 3 ft length fits tight desk-side links between a computer, router, switch or wall jack. Buyers who need a longer reach, in-wall rated cable, or shielded construction for noisy environments should look at a different product. The unshielded design keeps the cable light and flexible for typical indoor patching.

Category 5e rating and 100±15 Ω impedance

The cable is specified to Category 5e with a characteristic impedance of 100±15 Ω measured from 1 to 100 MHz. Conductor resistance is rated at 89.2 Ω/km maximum at 20 °C. That electrical profile determines whether the cord meets the performance required for a given network link.

Highlights

  • Category 5e rating supports 100 MHz bandwidth
  • 3 ft length keeps short runs tidy
  • 24 AWG stranded copper conductors ensure flexibility
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • White jacket simplifies cable identification

Specifications

BrandBelkin
ModelA3L791-03-WHT
TypeConsumer Electronics
Cat5E
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorWhite
ShieldedNo
FeaturesCharacteristic Impedence: 100±15O @ 1 ~ 100MHz
Conductor Construction: Bare Stranded Copper
Conductor Resistance: 89.2O/km/20°C max
Conductor Size: 24AWG x 4pairs
Connector Type: 50 micron gold-plated connector
Description: Cat5e UTP Stranded Patch Cable , ISO/IEC 11801; TIA/EIA-568-B.2
Dielectric Strength: AC 1.75kV/0.15sec
Flame Retardant Test: CM
Insulation Material: HDPE
Jacket Diameter: 5.5±0.15mm
Jacket Material: PVC
Mutual Capacitance: 56pF/m max
Propagation Delay: 538nS/100m max @ 100MHz
Rating: 75°C, 300V
Spark Test: 2.5kV
Standards Compliance: ISO/IEC 11801; TIA/EIA-568-B.2
Shipping weight0.05 kg
Package size127 × 76 × 23 mm

Questions about this item

How do I install the Belkin A3L791-03-WHT and what step do people get wrong?

Align the RJ-45 tab with the port notch and push until it clicks; the common mistake is forcing the connector in upside-down, which bends the gold-plated pins.

What maintenance or replacement will this 3 ft Cat 5e cable need later?

Inspect the 24AWG stranded copper conductors and RJ-45 clips periodically; replace the cable if the latch breaks or the jacket shows kinks that affect the 100±15 Ω impedance.

What limit appears first under sustained use of this patch cable?

The 89.2 Ω/km conductor resistance and unshielded 4-pair design mean signal attenuation over the 3 ft run is the first constraint on long-term throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.