We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 7 inch length, threaded both ends

Beck C. H.

Beck C. H. 1-1/4" MNPT x 7" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-P4KE-10GMP

Galvanized steel pipe nipple with 1-1/4" MNPT threads for air, gases, non-potable water and oils

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • Galvanised coating resists corrosion on air, gas, oil and non-potable water lines
  • Schedule 40 wall rated for 150 psi at 150 °F working pressure
  • Welded Grade B steel construction made in USA for structural integrity
  • 1-1/4" MNPT threads connect directly to matching fittings without adapters
  • 7" overall length suits standard piping runs and tight installations

1-1/4" Galvanized Steel Pipe Nipple

This new Beck C. H. pipe nipple is a Schedule 40 steel fitting with male NPT threads on one end and a threaded both-ends connection. It measures 7 inches in length with a 1-1/4 inch nominal pipe size and a galvanized coating for corrosion resistance. The welded construction suits air, gas, oil and non-potable water lines.

Installers needing 150 psi at 150 °F

The fitting handles a maximum operating pressure of 150 psi at 150 degrees Fahrenheit and is made in the USA from Grade B steel. It is not rated for steam service or potable water systems. Builders who need a steam-rated nipple or a fitting certified for drinking water should look at a different specification.

1-1/4" nominal size with 7" length

The single specification that decides fit is the 1-1/4 inch nominal pipe size combined with the 7 inch overall length. The outside diameter is 1 21/32 inches and the inside diameter is 1 3/8 inches. Verify these dimensions against your piping layout before ordering.

Highlights

  • Galvanised coating resists corrosion on air, gas, oil and non-potable water lines
  • Schedule 40 wall rated for 150 psi at 150 °F working pressure
  • Welded Grade B steel construction made in USA for structural integrity
  • 1-1/4" MNPT threads connect directly to matching fittings without adapters
  • 7" overall length suits standard piping runs and tight installations

Specifications

BrandBECK
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

How can I verify the galvanized steel pipe nipple is functioning correctly after installation?

Check for leaks at the 1-1/4" MNPT threads while running air, gases, non-potable water, or oils at up to 150 psi and 150°F. The welded Grade B steel construction should hold pressure without weeping.

What comes with the BECK 0331030403 pipe nipple and what additional parts are needed?

The box contains the 7" TBE galvanized steel nipple only. You must purchase compatible 1-1/4" NPT fittings, thread sealant or tape, and any valves or adapters required for your specific piping system separately.

Which version of this galvanized pipe nipple should I select for a 1-1/4" nominal pipe size system?

Choose the BECK 0331030403 model with 1-1/4" nominal pipe size, 1 3/8" inside diameter, 1 21/32" outside diameter, and Schedule 40 wall thickness. This matches standard 1-1/4" NPT piping requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.