We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board camera module with 5.91 inch flex cable and lens aperture 1.8

Bazarc

Bazarc Passive Component Camera Module 1080p 5.91 inch Flex Cable F1.8

SKU CH-N8V1-HCQMZ

A 1080p camera module with a 5.91 inch flex cable and F1.8 aperture for Raspberry Pi boards

  • TypeOther
  • Infrared night vision for clear low-light imaging
  • 1080p resolution captures detailed video
  • f/1.8 aperture gathers more light
  • 15 cm flex cable fits tight spaces
  • Compatible with Raspberry Pi 4B, 3B+, 3B, 2B

Bazarc Passive Component Camera Module 1080p 5.91

This passive component camera module delivers 1080p resolution with an F1.8 aperture for clear imaging. It includes automatic IR-cut night vision that switches between day and night modes for clearer low-light pictures. The module is designed for Raspberry Pi series boards including 4B, 3B+, 3B and 2B models. Builders needing a compact vision sensor with integrated infrared illumination will find it suitable.

15 cm flex cable and F1.8 aperture

The 15 cm (5.91 inch) flex cable determines placement options relative to the host board. The F1.8 aperture gathers more light, which directly improves night-vision clarity when the IR LEDs are active. Buyers who need a longer cable run or a different mounting geometry should verify the fixed length before ordering. No other cable length is included or specified.

Simple CSI connection with fixed cable length

The module connects via the standard CSI ribbon interface on compatible Raspberry Pi boards. Installation requires seating the 15 cm flex cable into the connector and enabling the camera in the operating system. The short, non-detachable cable can limit enclosure choices or require careful routing. Users must also ensure the IR LEDs have an unobstructed view for night-mode operation.

Highlights

  • Infrared night vision for clear low-light imaging
  • 1080p resolution captures detailed video
  • f/1.8 aperture gathers more light
  • 15 cm flex cable fits tight spaces
  • Compatible with Raspberry Pi 4B, 3B+, 3B, 2B

Specifications

TypeOther

Questions about this item

What does 1080p resolution actually deliver on a Raspberry Pi?

The sensor captures 1080p video, giving sharp detail for monitoring or computer-vision tasks on Pi 4B, 3B+, 3B and 2B boards.

How does the 15 cm flex cable limit placement?

The 5.91 inch cable reaches the CSI port on standard Pi models; longer runs need an extension ribbon.

What mounting clearance does the F1.8 lens and IR LED board need?

The combined camera and infrared light module fits in the standard Pi camera footprint; allow a few millimetres above the PCB for the lens barrel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.