Bazarc
Bazarc B/3B/3B passive component 15cm 8MP IMX219 1080p30 720p60 VGA90
An 8-megapixel Sony IMX219 camera module with a 15 cm ribbon cable for Raspberry Pi CSI ports, capturing 1080p30, 720p60 and VGA90 video
- TypeOther
- 8MP Sony IMX219 sensor delivers detailed stills and video
- 1080p30 720p60 VGA90 modes cover diverse recording needs
- 15cm ribbon cable connects directly to CSI port
- Works with Raspberry Pi 1 2 3 4 via MMAL V4L APIs
- Requires specific camera cable for Raspberry Pi Zero use
8MP Sony IMX219 Camera Module
This 8-megapixel camera module uses a Sony IMX219 sensor for Raspberry Pi boards. It captures still images and records video at 1080p30, 720p60 and VGA90. The module connects via a 15cm ribbon cable to the CSI port. It is compatible with Raspberry Pi 1, 2, 3 and 4 models and supports MMAL and V4L APIs.
Check CSI Port and Cable Fit
Verify your Raspberry Pi board has a standard CSI connector before ordering. The included 15cm ribbon cable fits full-size Pi boards directly. Raspberry Pi Zero models require a different, specific camera cable that is not supplied with this module. Ensure the cable length suits your enclosure or mounting plan.
Upgrade from 5MP OV5647 Sensor
This module replaces the original 5-megapixel OmniVision OV5647 camera. The jump is worth it when you need higher resolution stills, better colour fidelity and improved low-light performance. It also adds 720p60 and VGA90 video modes for smoother motion capture. Buyers needing motorised focus or infrared sensitivity should look elsewhere.
Highlights
- 8MP Sony IMX219 sensor delivers detailed stills and video
- 1080p30 720p60 VGA90 modes cover diverse recording needs
- 15cm ribbon cable connects directly to CSI port
- Works with Raspberry Pi 1 2 3 4 via MMAL V4L APIs
- Requires specific camera cable for Raspberry Pi Zero use
Specifications
| Type | Other |
|---|
Questions about this item
Does the module include the specific cable required for Raspberry Pi Zero?
The module ships with a 15cm ribbon cable for standard CSI ports; a separate Zero-compatible cable must be purchased for Pi Zero boards.
Is the Standard Version V2 the only variant offered for this module?
The listing describes the Standard Version V2 with the Sony IMX219 8MP sensor; no other versions or capacities are mentioned.
What video modes will the IMX219 sensor actually deliver on a Raspberry Pi 4?
The sensor supports 1080p at 30 fps, 720p at 60 fps and VGA at 90 fps, plus still capture, all via the CSI interface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Allen-Bradley 1762-OW8 /A MicroLogix 8 Channel Relay Output Module
Bazarc UPA USB Programmer V1.2 40pin ZIF 16pin SOIC 150mil 10pin ISP
- Potentiometers, Tri…



