We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular blue-backlit LCD meter with separate 100A shunt block

bayite DC 8-100V 0-100A Battery Monitor with 100A Shunt

SKU CH-3RCK-FW2VC

Measures DC voltage, current, power and energy up to 100A with included shunt and stores data when power is off

  • FeaturesDC, false
  • Height3.33 L x 1.75 W x 0.96 H inches
  • Width3.33 L x 1.75 W x 0.96 H inches
  • Length3.33 L x 1.75 W x 0.96 H inches
  • Weight7.04 ounces
  • Sports Team2 Piece
  • Monitors 0-100A current for precise load tracking
  • Measures DC 8-100V voltage across battery systems
  • Displays power up to 10kW and energy to 9999kWh
  • 1% accuracy with 2 readings per second
  • Retains energy data when power is removed

Bayite 100A DC Battery Monitor

The Bayite DC 8-100V monitor tracks voltage, current, power and energy on a single LCD. A 100A shunt is included for inline current measurement. The unit stores accumulated energy data when power is removed and offers a manual backlight toggle. It fits a 3.33 by 1.75 inch panel cutout.

For DC system installers needing live readouts

Suits technicians wiring solar arrays, marine banks or vehicle auxiliaries who want simultaneous voltage, amperage and wattage visibility. The 1% accuracy and two readings per second serve monitoring, not precision calibration. Not for AC circuits, outdoor exposure or loads that exceed the 100A shunt rating.

8 to 100 volt operating window

The meter only powers up and measures within the DC 8-100V range. Systems below 8V or above 100V cannot use this display. The 100A shunt defines the current ceiling, and the 10kW power ceiling follows from that limit.

Highlights

  • Monitors 0-100A current for precise load tracking
  • Measures DC 8-100V voltage across battery systems
  • Displays power up to 10kW and energy to 9999kWh
  • 1% accuracy with 2 readings per second
  • Retains energy data when power is removed

Specifications

Brandbayite
FeaturesDC, false
Height3.33 L x 1.75 W x 0.96 H inches
Width3.33 L x 1.75 W x 0.96 H inches
Length3.33 L x 1.75 W x 0.96 H inches
Weight7.04 ounces
Sports Team2 Piece

Questions about this item

How do I wire the 100A shunt into the negative lead and what size panel cutout fits the 3.33 x 1.75 inch display?

Mount the shunt in series on the negative conductor, connect the thin sense wires to the meter, then cut a 3.33 by 1.75 inch rectangular opening for the LCD module.

Does the 9999 kWh energy counter need a battery change or manual reset after long-term logging?

Energy data is stored without external power and can be cleared to zero from the front panel; no coin cell is required.

At what point does the overload alarm trigger during continuous high-current operation?

The backlight and power reading flash when active power exceeds the user-set threshold, up to the 10 kW measurement ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.