We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex multimode fiber patch cable with SC connectors on both ends, 10 ft long

BattleBorn

BattleBorn BB-SCSCDXMM-3M Duplex Multimode 62.5/125 SC/SC 10 ft

SKU CH-EFRR-J4WPG

Duplex multimode 62.5/125 µm SC/SC patch cable, 10 ft orange PVC jacket, 0.35 dB insertion loss, supports 1 Gbps, RoHS compliant

  • TypeHome Electronics Accessories
  • Length10 ft.
  • Connector Number1
  • 10 ft SC/SC duplex patch cable for short-range links
  • 5/125 µm multimode fibre supports 1 Gbps data rates
  • Low 0.35 dB insertion loss meets industry standards
  • Orange PVC jacket protects fibres and eases identification
  • RoHS-compliant construction with Corning optical fibre core

Duplex Multimode 62.5/125 SC/SC Patch Cable

This duplex multimode fiber patch cable uses 62.5/125 micron Corning optical fiber with SC connectors on both ends. It provides a 10 ft link for high-speed data transmission over greater distances than copper alternatives. The orange PVC jacket carries no electricity, making it safe for conduit runs where electrical isolation matters. It suits installers needing a ready-made multimode patch lead.

Attenuation 0.35 dB Insertion Loss

Insertion loss is rated at 0.35 dB, meeting or exceeding industry standards for low signal degradation across the 10 ft span. The passive fiber construction draws no power and generates no heat or audible noise during operation. Because it carries light rather than current, there is no electromagnetic interference to manage in the installation environment. The cable simply connects two SC ports without active components.

RoHS Compliant Orange PVC Jacket

The cable is RoHS compliant, confirming restricted hazardous substance limits in the materials used. The orange 3 mil PVC jacket protects the 62.5/125 micron core and 125 micron cladding while identifying the cable as multimode at a glance. Duplex clips keep the two SC connectors paired for correct channel alignment during installation. No software, drivers or additional accessories are included or required.

Highlights

  • 10 ft SC/SC duplex patch cable for short-range links
  • 5/125 µm multimode fibre supports 1 Gbps data rates
  • Low 0.35 dB insertion loss meets industry standards
  • Orange PVC jacket protects fibres and eases identification
  • RoHS-compliant construction with Corning optical fibre core

Specifications

BrandBattleBorn
ModelBB-SCSCDXMM-3M
TypeHome Electronics Accessories
Length10 ft.
Connector Number1

Questions about this item

How do I connect the SC duplex clips on the 62.5/125 multimode cable, and which step is often missed?

Push each SC connector straight into its transceiver until the duplex clip clicks; the step often missed is removing the protective dust caps from both ferrules before insertion.

What maintenance or replacement will the 62.5/125 multimode patch cord need over time?

Inspect and clean the SC ferrules with a lint-free wipe and isopropyl alcohol whenever signal loss rises; replace the cord if insertion loss exceeds the rated 0.35 dB or the orange PVC jacket shows cracks.

What is the first limit that appears on the 62.5/125 multimode link during sustained 1 Gbps traffic?

The 0.35 dB insertion-loss budget is the first constraint; exceeding it — through dirty connectors, tight bends beyond the 3 mm jacket rating, or excessive length — degrades the 1 Gbps signal before any other factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.