We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic ATX power splitter with one 24-pin male and two 24-pin female connectors

BattleBorn

BattleBorn 131106131282 24-pin to Dual 24-pin ATX Power Splitter data adapter

SKU CH-5PS4-F24MQ MPN 131106131282

Splits a single 24-pin ATX motherboard connector to power two PSUs simultaneously for high-load systems

  • Cable Length0 ft.
  • Weight1
  • Connect two PSUs to one motherboard via 24-pin splitter
  • Both power supplies start simultaneously for stable dual-PSU operation
  • Distribute GPU and component load across two units
  • Supports 24-pin and 20-pin ATX boards for flexible builds
  • Model 131106131282 built for high-demand mining and gaming rigs

Dual PSU adapter for single motherboard

The BattleBorn 131106131282 is a 24-pin to dual 24-pin ATX power splitter that lets two power supplies connect to one motherboard. It is designed for builders who need more combined wattage than a single unit can provide. Both supplies power up simultaneously to run video cards and other components from a single board.

Practical limits of the 24-pin ATX interface

The adapter splits the motherboard 24-pin connector so two PSUs share the load, but the 24-pin socket itself remains the single point of connection. Signal pins such as Power Good are shared between both units, so timing differences between supplies can affect stability. Cable length is minimal, so the two PSUs must sit close together in the chassis.

Check your existing setup before ordering

Verify that your motherboard uses a standard 24-pin or 20-pin ATX power input and that your case has room for two power supplies side by side. Confirm both PSUs have standard 24-pin outputs and that their combined capacity meets the system draw. This adapter does not add extra PCIe or EPS connectors, so each PSU must already provide the cables your components require.

Highlights

  • Connect two PSUs to one motherboard via 24-pin splitter
  • Both power supplies start simultaneously for stable dual-PSU operation
  • Distribute GPU and component load across two units
  • Supports 24-pin and 20-pin ATX boards for flexible builds
  • Model 131106131282 built for high-demand mining and gaming rigs

Specifications

BrandBattleBorn
Model131106131282
Cable Length0 ft.
Weight1

Questions about this item

Should I pick the 20-pin or 24-pin version of this ATX power splitter?

This adapter connects to both 20-pin and 24-pin motherboard sockets, so a single unit covers either standard.

What does the dual 24-pin layout mean once installed in my system?

It lets two separate power supplies start together and feed one motherboard, combining their output for graphics cards and other components.

How does the ATX interface limit what this splitter can do in practice?

The ATX connector handles standard motherboard power delivery; the splitter simply passes those signals to two PSUs simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.