BatteryJack inc.
BatteryJack inc. UPS Replacement Battery 12V 9Ah Panasonic UP-RW1245P1
A 12 V 9 Ah sealed AGM battery serves as a direct OEM replacement for Panasonic UP-RW1245P1 UPS units
- 12V 9Ah capacity powers UPS reliably
- AGM technology enables maintenance-free operation
- Sealed non-spillable design allows any orientation
- 100% OEM replacement fits Panasonic UP-RW1245P1
- Expected 4-7 year service life
Direct UPS replacement
This 12 V 9 Ah sealed lead-acid battery is built as a 100 % OEM replacement for the Panasonic UP-RW1245P1. It uses absorptive glass mat construction so the electrolyte is immobilised and the unit can operate in any orientation. The maintenance-free design removes the need for water topping or specific-gravity checks during its service life.
AGM chemistry constraints
Gas recombination exceeds 90 % during normal float operation, keeping internal pressure low and preventing electrolyte loss. The sealed case is classified non-spillable and meets IATA transport requirements, but the chemistry still limits usable capacity at high discharge rates and in deep-cycle applications. Expected float life spans four to seven years depending on temperature and charge regimen.
Sealed case and terminals
Leak-proof sealing allows horizontal or vertical mounting inside rack trays or cabinet shelves without acid risk. Standard F2 faston terminals match the original connector layout for tool-free swap-out. The three-year warranty on UPS devices reflects the manufacturer’s confidence in the build quality for continuous backup duty.
Highlights
- 12V 9Ah capacity powers UPS reliably
- AGM technology enables maintenance-free operation
- Sealed non-spillable design allows any orientation
- 100% OEM replacement fits Panasonic UP-RW1245P1
- Expected 4-7 year service life
Specifications
No published specifications for this item yet.
Questions about this item
Is this 12V 9Ah unit the direct replacement for the Panasonic UP-RW1245P1 model?
Yes, it is built as a 100% OEM replacement for the Panasonic UP-RW1245P1 and UPRW1245P1 part numbers, matching the 12V 9Ah specification exactly.
What runtime can I expect from the 9Ah capacity in my UPS?
The 9Ah rating sets the total energy reserve; actual runtime depends on your UPS load, but the AGM design delivers steady output until the voltage drops to the UPS cutoff point.
Does the sealed AGM construction allow any mounting orientation?
The sealed AGM build is classified as non-spillable and meets IATA requirements, so it can operate safely in any position without electrolyte leakage.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



