We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BatteryJack inc.

BatteryJack inc. 2 Pack 12V 10AH UPS Replacement Battery UB12100-S WP10-12

SKU CH-YG9S-4V6P3

Two 12 V 10 Ah AGM batteries deliver maintenance-free UPS backup with sealed, non-spillable construction and over 90 % gas recombination

  • Two-pack design doubles runtime capacity
  • 12V 10AH AGM chemistry delivers maintenance-free operation
  • Sealed non-spillable case allows safe use in any orientation
  • Gas recombination exceeds 90% for extended 4-7 year service life
  • 100% OEM-compatible replacement for UB12100-S and WP10-12 models

Universal 12V 10AH UPS Replacement Pair

This two-pack supplies 12-volt 10-ampere-hour sealed lead-acid batteries built to the UB12100-S and WP10-12 form factor. They serve as direct drop-in replacements for compatible uninterruptible power supplies and backup units.

Suits owners of matching UPS models needing

The AGM construction is maintenance-free and rated for four to seven years of float service. Buyers whose equipment requires a different voltage, capacity, terminal layout or chemistry should look at another product.

Delivers 10 ampere-hours at 12 volts per unit

Each battery handles typical UPS float loads and short runtime demands within its rated capacity. Extended runtime or higher current draws beyond the 10AH rating will exhaust the available headroom.

Highlights

  • Two-pack design doubles runtime capacity
  • 12V 10AH AGM chemistry delivers maintenance-free operation
  • Sealed non-spillable case allows safe use in any orientation
  • Gas recombination exceeds 90% for extended 4-7 year service life
  • 100% OEM-compatible replacement for UB12100-S and WP10-12 models

Specifications

No published specifications for this item yet.

Questions about this item

Will this 2-pack of 12V 10AH batteries fit my existing UPS that takes a UB12100-S or WP10-12 model?

These batteries are built as 100% OEM replacements for the UB12100-S and WP10-12, so they match the voltage, capacity and terminal layout of the original units.

Can I mix one of these new 12V 10AH batteries with an older battery of the same rating that is still in my UPS?

Mixing a fresh AGM cell with an aged one is not recommended; the older battery will charge and discharge at a different rate, shortening the life of the new unit.

How can I confirm the batteries are performing correctly after I install them?

Run a self-test from the UPS front panel or software; a healthy pack will hold the rated 10AH capacity and show the expected 4 to 7 year design life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.