We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 12 volt 2.3Ah sealed lead-acid battery with two F1 terminals

BatteryJack inc.

BatteryJack inc. 12v 2.3Ah SLA Replacement Battery F1 Terminals

SKU CH-T309-FB1Q0

12 V, 2.3 Ah sealed lead-acid battery with F1 terminals and AGM technology for maintenance-free UPS backup

  • AGM technology enables safe operation in any position
  • Sealed construction prevents electrolyte leakage from terminals or case
  • 90% gas recombination reduces internal pressure during use
  • Maintenance-free design requires no water checks or refills
  • 100% OEM replacement fits existing UPS units directly

12 V 2.3 Ah SLA battery for UPS units

This 12 volt 2.3 Ah sealed lead-acid battery uses AGM technology and F1 terminals. It is designed as a direct OEM replacement for compatible uninterruptible power supplies. The maintenance-free construction allows safe operation in any orientation. Expected service life ranges from four to seven years.

Replaces worn-out UPS batteries

When an existing UPS battery no longer holds sufficient charge, this unit restores backup runtime to the original specification. The jump is worth it when the UPS reports a battery fault or runtime drops below acceptable levels. Gas recombination exceeds 90 percent during normal use. The sealed design meets IATA non-spillable requirements for transport.

Limited to F1 terminal compatibility

The F1 terminal layout fits only UPS models that specify this connector type. Units requiring F2 or other terminal styles cannot use this battery without an adapter. Voltage and capacity are fixed at 12 volts and 2.3 Ah. No provision exists for adding electrolyte or performing maintenance during service life.

Highlights

  • AGM technology enables safe operation in any position
  • Sealed construction prevents electrolyte leakage from terminals or case
  • 90% gas recombination reduces internal pressure during use
  • Maintenance-free design requires no water checks or refills
  • 100% OEM replacement fits existing UPS units directly

Specifications

No published specifications for this item yet.

Questions about this item

Will the F1 terminals on this 12v 2.3Ah battery match the connectors inside my UPS unit?

The F1 terminals are standard faston tabs; they slide onto the matching F1 connectors used by most small UPS models, so no adapter is needed if your unit already uses F1.

What is the correct orientation when sliding this AGM battery into the UPS tray?

Because the sealed AGM design is non-spillable, the battery can be installed in any position; simply align the F1 terminals with the UPS leads and press firmly until seated.

How often will this maintenance-free SLA battery need to be replaced under normal UPS float service?

Expected float life is 4-7 years; plan replacement around the 4-year mark for critical loads or when runtime drops below acceptable levels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.