We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular sealed lead-acid battery, grey plastic case, two F2 terminals on top

BatteryJack inc.

BatteryJack inc. 12V 12AH F2 SLA UPS Replacement Battery for APC SC620

SKU CH-GT1K-5BPDY

12 V 12 Ah sealed lead-acid battery with F2 terminals fits the APC SC620 UPS

  • Direct OEM fit for APC SC620 UPS
  • Sealed AGM design requires zero maintenance
  • Expected service life of four to seven years
  • Compact 151 × 98 × 95 mm footprint fits tight racks
  • Three-year warranty covers UPS and backup devices

Direct replacement for APC SC620

This 12V 12AH sealed lead-acid battery uses AGM technology and an F2 terminal layout to match the original APC SC620 unit. It is built for uninterruptible power supplies, emergency lighting, alarm panels and similar backup-power applications. The maintenance-free design targets a service life of four to seven years under normal float conditions. Buyers needing a different voltage, capacity or terminal type should look elsewhere.

F2 terminal and fixed dimensions define fit

The F2 faston tabs dictate which connectors can be used; adapters or soldering are required for other terminal styles. Physical size is 151 mm long, 98 mm wide and 101 mm total height, so the battery compartment must accommodate those exact measurements. The 12 AH rating at 12 V sets the energy ceiling; longer runtime demands a higher-capacity pack rather than this unit. No other electrical interface or communication protocol is provided.

Rugged ABS container with carry weight of 4.20 kg

The battery weighs approximately 4.20 kg, so mounting hardware and shelf support must handle that mass safely. A sealed ABS case prevents electrolyte leakage and allows operation in any orientation without maintenance. The 3-year warranty on UPS devices reflects the manufacturer's confidence in build quality. Installers should verify clearance for the 101 mm total height including terminals before ordering.

Highlights

  • Direct OEM fit for APC SC620 UPS
  • Sealed AGM design requires zero maintenance
  • Expected service life of four to seven years
  • Compact 151 × 98 × 95 mm footprint fits tight racks
  • Three-year warranty covers UPS and backup devices

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 12 V 12 Ah version or a different capacity for my APC SC620?

The APC SC620 requires a 12 V 12 Ah battery, so this exact capacity is the correct match.

What runtime can I expect from the 12 Ah rating once the battery is installed in the UPS?

A 12 Ah pack typically supplies several minutes of backup for a loaded SC620, with actual time depending on the connected load.

Does the F2 terminal standard limit the current the battery can deliver to the UPS?

The F2 faston tabs are rated for the currents an SC620 draws, so they do not restrict normal UPS operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.