We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 12V sealed lead-acid UPS battery with four cells and 7.2A rating

Battery Technology Inc.

Battery Technology Inc. APCRBC116-SLA116 12V 4-Cell 7.2A UPS Replacement Battery

SKU CH-9XR8-NKZW4 MPN APCRBC116-SLA116

12 V sealed lead-acid battery with four cells and 7.2 A capacity fits APC SMX UPS models rated 750 VA and 1000 VA

  • TypeBattery
  • SpecificationsVolts: 12V Cells: 4 Amps: 7.2A Chemistry: Sealed Lead Acid
  • Sealed lead-acid design prevents spills and leaks
  • 2 A capacity keeps compatible UPS units running
  • Direct fit for APC SMX 750 and 1000 models
  • WEEE and China RoHS compliant for responsible disposal
  • 18-month limited warranty backs the replacement battery

Direct replacement for APC SMX UPS units

The Battery Technology APCRBC116-SLA116 is a 12 V sealed lead-acid battery designed to fit APC SMX750 and SMX1000 series uninterruptible power supplies. It uses a four-cell configuration rated at 7.2 A and 7200 mAh capacity. The spill-proof construction allows installation in any orientation without leakage risk.

Thermals noise and power draw in normal use

Sealed lead-acid chemistry produces no audible noise during float charging or standby operation. The battery accepts a continuous trickle charge from the UPS without generating measurable heat under typical office loads. Self-discharge remains low when the unit is kept at room temperature and fully charged.

Behaviour under sustained load rather than

During extended discharge the voltage curve follows standard lead-acid characteristics, delivering steady current until the UPS initiates shutdown. The 18-month limited warranty covers capacity retention under normal cycling conditions. Compliance with WEEE and China RoHS directives confirms regulated material handling.

Highlights

  • Sealed lead-acid design prevents spills and leaks
  • 2 A capacity keeps compatible UPS units running
  • Direct fit for APC SMX 750 and 1000 models
  • WEEE and China RoHS compliant for responsible disposal
  • 18-month limited warranty backs the replacement battery

Specifications

BrandBattery Technology
ModelAPCRBC116-SLA116
TypeBattery
SpecificationsVolts: 12V
Cells: 4
Amps: 7.2A
Chemistry: Sealed Lead Acid
Shipping weight11.34 kg
Package size533 × 279 × 178 mm

Questions about this item

How do I install the APCRBC116-SLA116 in my APC SMX UPS and which step is most often missed?

Power off and unplug the UPS, open the battery door, disconnect the old pack noting the red-to-red and black-to-black leads, insert the new 12 V 7.2 A pack, reconnect the leads in the same order, close the door, then power on and let the UPS run a self-test to recognise the new battery.

What replacement schedule should I expect for this 7200 mAh sealed lead-acid pack?

The sealed spill-proof design needs no routine maintenance; replace the pack when runtime falls short of your load requirements, typically after several years of service.

What is the first limit reached when the SMX1000 runs on this battery during a long outage?

The 7.2 A capacity determines how long the UPS can sustain the connected load; once the stored energy is depleted the UPS will shut down to protect the battery.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.