We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sealed lead-acid UPS replacement battery cartridge, two cells, 12 V 9 A, 11.32 lbs

Battery Technology Inc.

Battery Technology Inc. APCRBC109-SLA109 ups replacement battery 12V 9A 2 cells 11.32 lbs

SKU CH-T959-DN9H8 MPN APCRBC109-SLA109

Sealed lead-acid 12 V 9 A cartridge replaces APC RBC109 in BX1300LCD and BX1500LCD units

  • TypeBattery
  • CompatibilityAPC BX1300LCD, BX1500LCD Replace oem number(s): APCRBC109 RB
  • SpecificationsVolts: 12V Cells: 2 Amps: 9A Chemistry: Sealed Lead Acid
  • Reliable backup power for APC BX1300LCD and BX1500LCD UPS units
  • Sealed lead-acid chemistry delivers maintenance-free operation
  • 12 V 9 A output matches original cartridge specifications
  • Two-cell design fits directly into existing battery compartment
  • 18-month limited warranty provides extended protection

Direct Replacement Cartridge

The Battery Technology Inc. APCRBC109-SLA109 is a sealed lead-acid cartridge built for APC BX1300LCD and BX1500LCD units. It restores original runtime without modification to the UPS chassis. The pack contains two 12 V 9 A cells configured for drop-in installation. Buyers needing a different form factor or voltage should choose another model.

Sealed Lead Acid Construction

The maintenance-free chemistry eliminates watering and allows any orientation inside the cabinet. At 11.32 lbs the cartridge seats firmly on the factory rails and the existing connector mates without adapters. No extra cables or mounting brackets are required for the swap. Users who prefer lithium chemistry or hot-swap trays will not find those features here.

Restores Factory Runtime

Replacing an aged RBC109 or APCRBC109 pack returns the UPS to its rated backup time for connected loads. The 18 month limited warranty covers the service interval typical for SLA cells in standby use. If the load has grown beyond the original sizing a higher capacity cartridge or additional battery module would be needed instead.

Highlights

  • Reliable backup power for APC BX1300LCD and BX1500LCD UPS units
  • Sealed lead-acid chemistry delivers maintenance-free operation
  • 12 V 9 A output matches original cartridge specifications
  • Two-cell design fits directly into existing battery compartment
  • 18-month limited warranty provides extended protection

Specifications

BrandBTI
ModelAPCRBC109-SLA109
TypeBattery
CompatibilityAPC BX1300LCD, BX1500LCD
Replace oem number(s): APCRBC109 RBC109
SpecificationsVolts: 12V
Cells: 2
Amps: 9A
Chemistry: Sealed Lead Acid
Shipping weight5.90 kg
Package size254 × 216 × 165 mm

Questions about this item

What UPS models does the APCRBC109-SLA109 replace the RBC109 cartridge in?

This cartridge fits the APC BX1300LCD and BX1500LCD UPS units, replacing the original RBC109 battery pack.

What are the physical weight and cell count for this replacement cartridge?

The sealed lead-acid pack contains two cells and weighs approximately 11.32 lbs in total.

How is the battery cartridge installed in the UPS?

Power off and unplug the UPS, open the battery door, disconnect the old cartridge, connect the new one observing polarity, then close the door and restart.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.