Banjo
Banjo 050E 3/4" Male Adapter x 1/2" Hose Shank Trap
Connects a 3/4 inch male adapter to a 1/2 inch hose with a 300 psi working pressure at 70 degrees
- TypeDrain Components
- MaterialHAWA
- Polypropylene body resists corrosion in fluid transfer
- EPDM gasket seals reliably up to 300 psi
- 3/4" male adapter fits standard plumbing threads
- 1/2" hose shank connects directly to hose ID
- Rated for 70 F operating temperature
Purpose-built plumbing adapter
The Banjo 050E is a Type E cam-and-groove coupling made from polypropylene with an EPDM gasket. It connects a 3/4-inch male adapter to a 1/2-inch hose shank for fluid transfer applications. The fitting is rated for a maximum working pressure of 300 psi at 70 degrees Fahrenheit.
Suits simple hose-to-pipe connections
This adapter suits installers needing a quick, tool-free connection between a male thread and a flexible hose. It is not for systems requiring a locking arm for vibration security or for pipe diameters outside the specified 3/4-inch and 1/2-inch sizes.
Handles standard pressure cleanly
The polypropylene body and EPDM seal comfortably handle the rated 300 psi working pressure at 70 degrees Fahrenheit. Headroom decreases as fluid temperature rises above the 70-degree reference point, so high-temperature service requires separate verification.
Highlights
- Polypropylene body resists corrosion in fluid transfer
- EPDM gasket seals reliably up to 300 psi
- 3/4" male adapter fits standard plumbing threads
- 1/2" hose shank connects directly to hose ID
- Rated for 70 F operating temperature
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Brand | Banjo |
| Model | 050E |
Questions about this item
What size hose do I need to connect to the 1/2 in hose shank on this adapter?
The fitting accepts a hose with a 1/2 in inner diameter that matches the hose shank size.
Will the polypropylene body handle the same 300 psi rating as my existing metal fittings at 70 F?
Yes, the adapter is rated for a maximum working pressure of 300 psi at 70 F, matching that pressure level.
How can I confirm the EPDM gasket is sealing properly after I attach the cam lever?
Pressurise the line to the working pressure and check the cam connection for any visible leaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
K Tool International
K-Tool International SF-7212 Pitman Arm Puller Ball Joint Separator Tie Rod Tool
$78.99
0.00095417BTC
In stock
