We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 16-pin right-angle GPU power cable with dual 8-pin connectors, 13 ft length

Bangfun RTX4070-13W 13ft 16Pin Right Angle GPU Power Cable

SKU CH-FKDX-KJDAR

Right-angled 16-pin to dual 8-pin PCIe 5.0 extension cable delivers up to 400 W to RTX 4070-class GPUs while easing tight-case routing

  • Length13 feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 20 volts; Weight: 0.1 kilograms; Connector: Male-to
  • Right-angled 16-pin connector eases tight case routing
  • 13-foot length gives flexible cable management space
  • 16AWG tinned copper wire supports stable 400W power delivery
  • Dual 8-pin female ends connect to RTX 4070 and 4070 Ti cards
  • Alloy copper terminals reduce heat at the plug connection

16-Pin Right-Angle GPU Power Cable

The Bangfun RTX4070-13W is a 13-foot PCIe 5.0 extension cable with a 90-degree 16-pin male connector and dual 8-pin female ends. It targets builders installing GeForce RTX 4070 or 4070 Ti graphics cards who need to route power cleanly in compact cases without stressing the native 12VHPWR plug.

Replaces the Stiff Factory 12VHPWR Lead

The right-angle design removes the sharp bend that can cause overheating or loose contact on the stock adapter. The 16 AWG tinned copper conductors support continuous loads of 300 to 400 watts with a 400-watt peak, making the upgrade worthwhile when the original cable is too short or rigid for the chosen chassis layout.

Fits Builds Using Dual 8-Pin PSU Cables

The male-to-female layout connects directly to two existing 8-pin PCIe cables from the power supply, freeing the builder from hunting for a native 16-pin PSU lead. It is not suitable for 12-pin RTX 3090 series cards or for systems that require a three 8-pin source connection.

Highlights

  • Right-angled 16-pin connector eases tight case routing
  • 13-foot length gives flexible cable management space
  • 16AWG tinned copper wire supports stable 400W power delivery
  • Dual 8-pin female ends connect to RTX 4070 and 4070 Ti cards
  • Alloy copper terminals reduce heat at the plug connection

Specifications

BrandBangfun
ModelBangfun RTX4070-13W
Length13 feet
Connector DetailMale-to-Female
SpecificationsVoltage: 20 volts; Weight: 0.1 kilograms; Connector: Male-to-Female; UL Listed: false

Questions about this item

How much clearance does the 90-degree 16-pin connector need behind the graphics card?

The right-angle 16-pin connector sits flush against the card edge, so only the 13-inch cable length behind it requires routing space in the case.

Which orientation should the 16-pin male connector face when plugging into an RTX 4070 Ti?

Align the 12+4 pin male connector with the card's 12VHPWR socket and press straight in until the latch clicks; the 90-degree bend then points the cable toward the motherboard.

When should the 16AWG tinned copper cable be inspected or replaced?

Check the braided sleeve and connector pins whenever the GPU is removed; replace the cable if any pin shows discoloration or the sleeve has frayed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.