Ballistic
Ballistic 6-in-1 Car Charger 27W 2PD 4USB QC3.0 Voltage Display
A six-port car charger delivering 27 W through two PD and four USB sockets with QC3.0 fast charging and a built-in voltage display for 12-24 V vehicles
- TypeCar Charger
- 6 ports charge multiple devices simultaneously
- 27W total output powers phones and tablets fast
- Voltage display monitors 12V or 24V battery health
- Aluminium alloy and ABS construction resists heat and wear
- Compact 2.42×1.50×1.50 inch size fits any cigarette lighter
6-in-1 Car Charger with Voltage Display
This 6-in-1 car charger delivers 27W total output through two PD ports and four USB ports. It fits 12V and 24V vehicle sockets and shows live battery voltage on a built-in display. The aluminium alloy and ABS body measures 2.42 by 1.50 by 1.50 inches and weighs 1.05 oz.
Replaces single-port adapters and slow chargers
Upgrading makes sense when you need to fast-charge multiple phones, tablets or dash cams at once while monitoring vehicle voltage. The 3.1A combined current and QC3.0 support cut charging time for compatible devices compared with basic 5W plugs.
Check your socket voltage and port needs
Confirm your vehicle uses a standard 12V or 24V cigarette lighter socket. Verify that your devices charge via USB-A or USB-C PD so every port can be used. The display flags abnormal voltage below 11.6V or above 14.8V on 12V systems and below 23.2V or above 27.2V on 24V systems.
Highlights
- 6 ports charge multiple devices simultaneously
- 27W total output powers phones and tablets fast
- Voltage display monitors 12V or 24V battery health
- Aluminium alloy and ABS construction resists heat and wear
- Compact 2.42×1.50×1.50 inch size fits any cigarette lighter
Specifications
| Type | Car Charger |
|---|
Questions about this item
What size cigarette lighter socket does the 2.42 by 1.50 by 1.50 inch charger fit?
It plugs into standard 12 V and 24 V cigarette lighter sockets found in cars, SUVs and trucks.
How do I install the charger and what step is often missed?
Insert the plug fully until the voltage display powers on; the screen then shows live battery voltage so you can confirm a good connection.
When should the charger be replaced based on the voltage readout?
Replace it if the display shows 11.6 V or 14.8 V on a 12 V system, or 23.2 V or 27.2 V on a 24 V system, indicating abnormal vehicle voltage.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
