We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Baldwin 10mm 49ft Static Utility Rope Blue 2000LB

SKU CH-9QT8-RPRE0

A 10mm static nylon rope, 49ft long with a 2000lb tensile strength and an end hook for secure pulling and rigging

  • TypeRope
  • MaterialNylon
  • FinishNylon
  • 2000 lb tensile strength handles heavy pulling and rigging loads
  • Tight-braided polyester resists bark abrasion and fraying on rough surfaces
  • 49 ft length suits tree work, vehicle recovery and horizontal hauling
  • Firm static construction breaks in with flexing for easier knot tying
  • End hook speeds up attachment for climbing, engineering and utility tasks

10mm 49ft Static Utility Rope

This 10mm diameter static utility rope measures 49ft in length and offers a 2000LB tensile strength for heavy pulling and rigging tasks. The nylon construction resists abrasion from bark, concrete and metal hardware. It is designed for vehicle recovery, tree limb removal and horizontal hauling systems where minimal stretch is required. Not rated for life-support climbing.

Replaces stretch ropes for fixed-length hauling

Switch from elastic ropes when the job demands a fixed working length under load, such as winch lines, pulley systems or securing heavy loads over rough surfaces. The firm, low-stretch character means the rope holds position without the bounce that can compromise control. A brief break-in period of flexing the full length improves knot handling while retaining full rated strength.

Check anchor points and hardware ratings

Verify that your attachment points, pulleys, carabiners and winch components are rated for loads up to 2000LB before putting this rope into service. The single hook supplied at one end must also match the working load limit of your system. Ensure the 49ft length suits the distance between anchors for your intended rigging or recovery configuration.

Highlights

  • 2000 lb tensile strength handles heavy pulling and rigging loads
  • Tight-braided polyester resists bark abrasion and fraying on rough surfaces
  • 49 ft length suits tree work, vehicle recovery and horizontal hauling
  • Firm static construction breaks in with flexing for easier knot tying
  • End hook speeds up attachment for climbing, engineering and utility tasks

Specifications

BrandBaldwin
TypeRope
MaterialNylon
FinishNylon

Questions about this item

What diameter and length does this 10 mm 49 ft static rope need for a pulley or winch?

The rope is 10 mm thick and 49 ft long, so match your pulley groove or winch drum to that diameter and ensure the drum can hold the full length.

How do I install the sewn eye and hook, and what step do users skip?

The rope arrives with a sewn eye and hook on one end; clip the hook to your anchor point, then flex the full 49 ft back and forth several times before first use to break in the fibers for easier knotting.

When should I retire this 2000 lb tensile-strength rope?

Inspect the polyester sheath before every job; retire the rope immediately if you see cut strands, melted spots, heavy abrasion from bark or metal, or if the sewn eye or hook shows deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.