Bailink
Bailink M.2 2280 SSD Heatsink 79×24×48mm 14.8W/m.K
Double-sided aluminium heatsink with 14.8 W/m.K thermal pad and heat pipe cuts M.2 2280 SSD temperatures by 10–30 °C
- FeaturesDouble-sided cooling - Aluminum alloy-Groove design, greatly
- Double-sided cooling lowers SSD temperature by 10°C to 30°C
- 8 W/m.K thermal pad conducts heat efficiently from both drive sides
- Grooved aluminium fins expand dissipation area to 4500 mm²
- Third-generation reverse-gravity heat pipe moves heat away rapidly
- Fits M.2 2280 modules measuring 79 × 24 × 48 mm
M.2 2280 heatsink for overheating SSDs
This Bailink heatsink fits the 2280 form factor and uses a double-sided aluminium fin stack with an embedded heat pipe. It targets builders whose M.2 drives hit thermal throttling under sustained read or write workloads. The grooved fin design expands the dissipation area to 4500mm² while the 6 mm AGHP generation 3 reverse gravity pipe moves heat away from the controller and NAND.
Two thermal pads cover single or double-sided drives
A 14.8 W/m.K nano-silicone pad sits on each face of the heatsink, so the same unit works whether the SSD places chips on one side or both. The pads conform to surface unevenness without needing separate thicknesses or adhesive strips. Electroplated reflow soldering bonds the fin array to the base, eliminating air gaps that would otherwise limit conductivity.
Tool-free press fit with clearance caveats
The heatsink clamps onto the drive using the supplied stainless steel bottom plate and spring-loaded screws; no motherboard mounting holes are required. Total height reaches 48 mm, so builders must verify clearance beneath graphics cards, CPU coolers or motherboard shields before ordering. The 79 × 24 mm footprint matches the 2280 length but may overhang adjacent slots on densely packed boards.
Highlights
- Double-sided cooling lowers SSD temperature by 10°C to 30°C
- 8 W/m.K thermal pad conducts heat efficiently from both drive sides
- Grooved aluminium fins expand dissipation area to 4500 mm²
- Third-generation reverse-gravity heat pipe moves heat away rapidly
- Fits M.2 2280 modules measuring 79 × 24 × 48 mm
Specifications
| Brand | Bailink |
|---|---|
| Features | Double-sided cooling - Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling Advanced technology - Second generation gasket with heat dissipation up to 14.8w / m.k, full electroplating reflow welding process, pure aluminum electroplating passive fin group, pure aluminum electroplating base, aluminum alloy decorative top cover + stainless steel fixed bottom surface, 4500mm² Heat dissipation area, single tube double fitting wel |
Questions about this item
Will the thermal pads need replacing after long-term use?
The second-generation Odyssey silicone pads are designed for sustained conductivity and do not require scheduled replacement under normal operation.
At what point does the heatsink stop lowering drive temperature during heavy writes?
Cooling effect ranges from 10°C to 30°C depending on airflow and load; the limit is reached when the 4500 mm² fin area and 6 mm heat pipe can no longer move heat faster than the SSD generates it.
How much noise or extra power does this cooler add when the PC runs all day?
It is a fully passive design with no fan, so it adds zero noise and draws no power while the 14.8 W/m.K pads and heat pipe handle heat silently.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
