Axiom
Axiom MPO Female to 4 LC Singlemode 9/125 Breakout Cable 22.97 ft
Single-mode 9/125 µm fiber breakout cable splits one MPO female connector into eight LC male connectors over 22.97 ft
- Single-mode 9/125 µm core for long-distance links
- 97 ft yellow jacket simplifies routing
- MPO female to four LC male breakout splits one trunk
- Crush-resistant sheath protects fibers during installs
- Lifetime limited warranty backs the build quality
Axiom MPO Female to 4 LC Singlemode Breakout Cable
This Axiom breakout cable converts a single MPO female connector into four LC male connectors for single-mode fibre networks. It suits installers and data-centre technicians who need to fan out trunk cables into patch panels or transceivers. The 9/125 µm core/cladding diameter matches standard OS2 single-mode specifications for long-distance links.
Installation notes and common issues
The cable arrives pre-terminated so no field polishing or epoxy work is required. Ensure the MPO key alignment matches the transceiver or cassette orientation before mating. Dirty or damaged end-faces are the most frequent cause of high insertion loss; clean both ends with a fibre inspection scope and approved wipes before connecting.
Behaviour under sustained load
Single-mode fibre carries signals over kilometres without measurable signal degradation, so sustained throughput is limited by the attached electronics rather than the cable itself. The crush-resistant yellow jacket protects the fibres during routing and long-term deployment in dense cable trays. Lifetime warranty coverage reflects the passive, solid-state nature of the assembly.
Highlights
- Single-mode 9/125 µm core for long-distance links
- 97 ft yellow jacket simplifies routing
- MPO female to four LC male breakout splits one trunk
- Crush-resistant sheath protects fibers during installs
- Lifetime limited warranty backs the build quality
Specifications
| Brand | Axiom |
|---|
Questions about this item
How can I verify the MPO-to-LC breakout is passing light correctly after installation?
Use a visual fault locator or power meter at each of the four LC ends to confirm continuity through the single-mode 9/125 µm fiber.
What connectors and cables are included, and what must I source separately?
The cable has one MPO female connector on the first end and eight LC male connectors on the second end; patch panels or transceivers are not included.
Which length should I choose for a 7-metre run between racks?
The 22.97 ft length matches a 7-metre run, so select this version for that distance.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



