We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular box with four HDMI inputs and four outputs on the rear panel

Avico

Avico 4x4 HDMI 2.0 Matrix Switch with WebGui

SKU CH-5VM6-2FB7M

Routes four HDMI sources to four displays at 4K 60 Hz with web, RS-232 and remote control

  • Ports4x4 Matrix
  • 4K 60 Hz 4:4:4 video clarity with HDMI 2.0 and HDCP 2.2
  • Any of four sources to any of four displays via 4x4 matrix
  • Control from phone, tablet or PC through browser-based WebGui
  • EDID set by DIP switches, RS232 or WebGui for instant compatibility
  • Driver-free plug-and-play operation starts working the moment you connect cables

4x4 HDMI Matrix Switch

The Avico 4x4 HDMI 2.0 Matrix Switch routes four HDMI sources to four independent displays. It supports 4Kx2K at 60 Hz with 4:4:4 chroma sampling and 1080p 3D signals. The unit is HDMI 2.0 and HDCP 2.2 compliant and works with earlier HDMI versions. It suits home entertainment, conference rooms, digital signage and surveillance installations.

Integration and EDID Management

Connect computers, consoles, streaming boxes or cameras to the four inputs and drive TVs, monitors, projectors or signage screens from the four outputs. Built-in EDID management lets you select preset timings via rear DIP switches, RS232 commands or the web interface. This ensures stable handshakes without needing external scalers or distribution amplifiers for each display.

WebGui Control and Accessories

The WebGui provides browser-based control from any device on the same network, including phones and tablets. It exposes resolution controls, audio settings, video routing presets and system commands beyond what the handheld remote or RS232 link offer. No driver installation is required for basic plug-and-play operation.

Highlights

  • 4K 60 Hz 4:4:4 video clarity with HDMI 2.0 and HDCP 2.2
  • Any of four sources to any of four displays via 4x4 matrix
  • Control from phone, tablet or PC through browser-based WebGui
  • EDID set by DIP switches, RS232 or WebGui for instant compatibility
  • Driver-free plug-and-play operation starts working the moment you connect cables

Specifications

Ports4x4 Matrix

Questions about this item

Does the HDMI 2.0 bandwidth limit 4:4:4 colour at 60 Hz on all four outputs?

Yes, the matrix is specified for 4Kx2K@60Hz 4:4:4 across every port, so full chroma resolution is maintained on all four outputs simultaneously.

How much heat or noise does the unit produce when powered continuously?

The supplier data does not quote thermal or acoustic figures; only the HDMI 2.0, HDCP 2.2 and EDID management capabilities are documented.

What network connection must already exist to reach the WebGui?

The matrix needs a wired Ethernet link to your LAN; once connected, any browser on the same network can open the WebGui by entering the unit's IP address.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.