We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square cooling fan with transparent blades, 10mm thick, three-wire lead

AVC

AVC F6010T12HS 60MM Fan diy cooling

SKU CH-YGZ3-GCYGK

60 mm DC 12 V fan spins at 4800 RPM delivering 22.18 CFM at 36.2 dBA with ball bearing and tach sensor

  • 60 mm square frame fits tight build spaces
  • 12 V DC power with 5–13.2 V operating range
  • 4800 RPM delivers 22.18 CFM airflow
  • 2 dBA noise level for quiet operation
  • Ball bearing and 3-pin tach sensor for speed monitoring

AVC 60 mm 12 V Ball-Bearing Fan

The AVC F6010T12HS is a 60 x 60 x 10 mm DC brushless fan built for DIY cooling projects. It runs on a 12 V supply with an operating range of 5 V to 13.2 V and draws 0.19 A for 2.28 W of input power. A ball bearing supports the rotor for durable continuous operation.

Suitable for tight chassis spots needing measured

This fan delivers 22.18 CFM at 4800 RPM with a noise level of 36.2 dBA, making it a fit for compact enclosures or component heatsinks where space is limited. The 3-pin tachometer wire allows speed monitoring by a motherboard or controller. Builders who need higher static pressure, lower acoustic output, or PWM speed control should look at other models.

6.5-inch 3-pin lead with tachometer output

The unit terminates in a 6.5-inch three-wire cable that provides power, ground, and a speed sensor signal for RPM feedback. This connector length reaches most nearby headers on small-form-factor boards without extension cables. Verify that your header pinout matches the standard three-pin layout before installation.

Highlights

  • 60 mm square frame fits tight build spaces
  • 12 V DC power with 5–13.2 V operating range
  • 4800 RPM delivers 22.18 CFM airflow
  • 2 dBA noise level for quiet operation
  • Ball bearing and 3-pin tach sensor for speed monitoring

Specifications

BrandAVC
ModelF6010T12HS

Questions about this item

At 4800 RPM, what is the sustained noise level of the AVC F6010T12HS fan?

The fan produces 36.2 dBA at its rated 4800 RPM speed under continuous operation.

How much power does the fan draw during all-day use?

It draws 2.28 W at 12 V with a current of 0.19 A across the 5 V to 13.2 V operating range.

What connector does the fan need on the motherboard or controller?

It uses a 3-pin, 3-wire connector with a 6.5-inch lead for power and tachometer signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.