We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Y-stereo microphone cable with 1/4 inch plug 1.52 m long

Audio Implements

Audio Implements HDS-90 Microphone 1/4" Y Stereo 1.52 m #636

SKU CH-6YXY-A7B5G

A straight-cord stereo microphone with a 1/4" Y plug and 1.52 m high-flex tinsel cable

  • High-flex tinsel cable resists tangling during long sessions
  • 1/4" Y stereo plug splits signal for dual-ear monitoring
  • 52 m length gives freedom to move while recording
  • Straight cord design keeps layout clean on desk
  • Model 636 built for reliable stereo audio capture

Microphone cable with dual 1/4" connectors

The Audio Implements HDS-90 is a straight stereo Y-cable that splits one 6.3 mm plug into two 1/4" jacks. High-flex tinsel construction keeps the 1.52 m grey lead pliable during long sessions. It connects headphones or dual-mono sources to a single stereo output.

Suited for stereo monitoring or dual-input routing

Streamers and studio users who need a single cable to feed two 1/4" ports will find the Y topology convenient. Buyers who require ear tips, a coiled cord, a shorter reach, or a different plug format should look at other models.

Terminated with a 1/4" Y stereo plug

The 6.3 mm stereo plug is the only interface on the source end, so the host device must provide a matching 1/4" stereo jack. Verify that your interface, mixer or controller accepts this connector before ordering.

Highlights

  • High-flex tinsel cable resists tangling during long sessions
  • 1/4" Y stereo plug splits signal for dual-ear monitoring
  • 52 m length gives freedom to move while recording
  • Straight cord design keeps layout clean on desk
  • Model 636 built for reliable stereo audio capture

Specifications

No published specifications for this item yet.

Questions about this item

Does the 1.52 m high-flex tinsel cable resist tangling when the HDS-90 microphone is used all day?

The high-flex tinsel construction is designed to stay pliable and resist kinking during extended sessions, so the 1.52 m cord remains manageable without developing memory coils.

What input jack must my recorder or interface provide for the HDS-90's 6.3 mm Y stereo plug?

You need a single 1/4 inch (6.3 mm) TRS stereo socket; the Y plug carries both left and right channels on one connector.

Can I plug the HDS-90's 6.3 mm Y stereo plug directly into a vintage mixer that only has separate 1/4 inch TS mono jacks?

No — the stereo TRS plug will not split across two mono TS inputs; you would need a stereo-to-dual-mono splitter adapter to connect it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.