We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ultra-thin HDMI splitter box, black plastic, one input two outputs, USB power cable included

AUBEAMTO

AUBEAMTO HDMI Splitter 1x2 Ultra Thin 4K@30Hz

SKU CH-562Y-V0Y52

Splits one HDMI source to two displays at up to 4K@30Hz, 1080p@60Hz and 3D with USB power and 25ft cable support

  • TypeHDMI Splitters
  • Ports2
  • Input Connector1x HDMI female
  • Output Connector2x HDMI female
  • Maximum Cable LengthInput cable distance ≤ 12m (1080P resolution), Output cable
  • Maximum Resolutions3840 x 2160
  • Duplicate one source to two screens
  • 4K resolution at 30 Hz supported
  • Passive green design uses USB power
  • Compact 6.3 x 5.3 x 1.2 cm size
  • 3D and multichannel audio formats included

Signal distribution

The AUBEAMTO HDMI Splitter 1x2 takes a single HDMI source and mirrors it to two displays simultaneously. It handles video and audio together with no added latency. The unit supports 4K at 30 Hz, 1080p at 60 Hz and 3D formats. It is intended for users who need the same image on two screens, not for extending a desktop across them.

Passive thermals

The splitter operates without a fan or active cooling, drawing power only through the included USB cable. Because it has no moving parts it adds no audible noise to the room. Power consumption stays low enough for a standard USB port, so no external power brick is required during normal use.

Compact integration

Measuring 2.5 by 2.1 by 0.5 inches the device fits behind a display or inside a equipment rack without crowding other connections. It accepts HDMI cables up to 12 metres at 1080p and up to 8 metres at 4K on both input and output sides. Builders who need to extend a desktop across independent monitors or who require HDCP 2.2 compliance should choose a different solution.

Highlights

  • Duplicate one source to two screens
  • 4K resolution at 30 Hz supported
  • Passive green design uses USB power
  • Compact 6.3 x 5.3 x 1.2 cm size
  • 3D and multichannel audio formats included

Specifications

TypeHDMI Splitters
Ports2
Input Connector1x HDMI female
Output Connector2x HDMI female
Maximum Cable LengthInput cable distance ≤ 12m (1080P resolution),
Output cable distance ≤ 20m,(When the resolution is 4K, Input cable up to 8m, Output cable up to 8m)
Maximum Resolutions3840 x 2160
Package Contents0.8

Questions about this item

How do I install the AUBEAMTO 1x2 HDMI splitter and what step is often missed?

Connect the source to the single HDMI input, plug the two displays into the two HDMI outputs, then power the unit through the included USB cable — the step people forget is providing that USB power, because the splitter will not pass a signal without it.

What maintenance or replacement will the AUBEAMTO 1x2 HDMI splitter need later?

No internal parts require scheduled maintenance; only the external HDMI cables or the USB power cable may need replacing if they become damaged or if you need longer runs beyond the 8-metre 4K or 12-metre 1080p input limits.

What limit appears first when the AUBEAMTO 1x2 HDMI splitter runs continuously at 4K?

The 4K output is capped at 30 Hz and HDCP 1.2, so protected 4K 60 Hz or HDCP 2.2 content will not pass — that protocol ceiling is the first sustained-use restriction you will hit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.