We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black DisplayPort 1.4 bidirectional switch with select button

AUBEAMTO

AUBEAMTO DP 1.4 Bidirectional Switch 2-in-1-out/1-in-2-out 8K@30Hz 4K@120Hz

SKU CH-FPXS-NFW94

A bidirectional DisplayPort 1.4 switch routes two sources to one display or one source between two displays at up to 8K 30 Hz and 4K 120 Hz

  • Bidirectional DP 1.4 switch toggles two sources on one display or one source across two monitors
  • 4 Gbps bandwidth carries 8K at 30 Hz and 4K up to 165 Hz
  • One-key switching changes inputs in 1-3 seconds without signal delay
  • 10-bit colour depth and HDR support deliver richer contrast and colour accuracy
  • USB-powered operation ensures stable performance with cables up to 3 m total length

Bidirectional DisplayPort 1.4 switch

The AUBEAMTO DP 1.4 switch connects two DisplayPort sources to one display or one source to two displays. It is built for users who need to toggle between a laptop and a desktop or between two monitors without unplugging cables. Only one output is active at a time. The unit requires USB power to operate.

Passive thermal design and low power draw

The adapter runs without a fan, relying on its metal casing for heat dissipation. It draws power exclusively from the supplied USB cable, adding negligible load to the host system. Operation is silent and there are no reported thermal throttling issues during typical switching use. Total cable length should not exceed three metres.

Replaces manual cable swapping or basic splitters

This unit upgrades setups where users physically swap DisplayPort cables or use unpowered splitters that drop signal at high resolutions. The jump is worthwhile when you regularly switch between two DP sources or need to route one source to two different displays. It does not support simultaneous dual-monitor output or resolutions beyond the listed refresh rates.

Highlights

  • Bidirectional DP 1.4 switch toggles two sources on one display or one source across two monitors
  • 4 Gbps bandwidth carries 8K at 30 Hz and 4K up to 165 Hz
  • One-key switching changes inputs in 1-3 seconds without signal delay
  • 10-bit colour depth and HDR support deliver richer contrast and colour accuracy
  • USB-powered operation ensures stable performance with cables up to 3 m total length

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the AUBEAMTO DP 1.4 switch and what step is often missed?

Connect your DisplayPort sources and display, then plug the included USB power cable into a 5 V port; without USB power the switch will not pass a signal.

What maintenance or replacement will the AUBEAMTO DP 1.4 switch need later?

No scheduled maintenance is required; keep the USB power connection secure and avoid cables longer than 3 m total to maintain 32.4 Gbps bandwidth.

What limit appears first during sustained use of the AUBEAMTO DP 1.4 switch?

The 3 m total cable-length limit restricts 8K 30 Hz or 4K 120 Hz stability before any thermal or bandwidth ceiling is reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.