We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with three DisplayPort sockets and a USB power port, button on top

AUBEAMTO

AUBEAMTO DP 1.4 Bidirectional Splitter 2-in-1-out 8K@60Hz

SKU CH-Q6S4-J6E3Y

A bidirectional DisplayPort 1.4 switch routes two sources to one display or one source across two monitors at 8K 60 Hz and 4K 120 Hz

  • Bidirectional DP 1.4 switch connects two sources to one display or one source to two displays
  • 8K at 60 Hz and 4K at 120 Hz supported with 32.4 Gbps bandwidth
  • Manual button switching changes signal in about one second with LED status indicators
  • USB power required for operation using the included cable
  • Backward compatible with earlier DisplayPort standards for legacy equipment

What this switcher does

The AUBEAMTO DP 1.4 bidirectional splitter connects two DisplayPort sources to one display or one source to two displays. Only one output is active at a time, so both screens cannot show content simultaneously. It suits users who need manual switching between a PC and a laptop or between two monitors without unplugging cables.

Resolutions and bandwidth headroom

The unit supports 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz with a 32.4 Gbps link. These modes need a compliant DisplayPort 1.4 cable and matching source or display capability. Lower resolutions and refresh rates pass through without issue, but the 32.4 Gbps ceiling limits higher-bandwidth formats.

When to choose this over a passive adapter

A passive adapter cannot route two sources to one screen or toggle one source between two screens. This switcher adds a powered selector button and status LEDs for instant manual changes. It is not suited for setups that require simultaneous dual-monitor output or automatic switching based on signal detection.

Highlights

  • Bidirectional DP 1.4 switch connects two sources to one display or one source to two displays
  • 8K at 60 Hz and 4K at 120 Hz supported with 32.4 Gbps bandwidth
  • Manual button switching changes signal in about one second with LED status indicators
  • USB power required for operation using the included cable
  • Backward compatible with earlier DisplayPort standards for legacy equipment

Specifications

No published specifications for this item yet.

Questions about this item

Will this DP 1.4 bidirectional splitter work with my older DisplayPort 1.2 monitor and cables?

Yes, the splitter is backward compatible with all previous DisplayPort standards, so it will function with DP 1.2 equipment, though maximum resolution and refresh rate will be limited by the older link.

How can I confirm the switch is actively passing an 8K@60Hz signal after I press the button?

The indicator lights show the active port, and your display's on-screen information should report 7680x4320 at 60 Hz when the source is sending that mode.

Does the package include the DisplayPort 1.4 cables and the USB power cable, or must I buy them separately?

The USB power cable is required and included; standard DP 1.4 cables are not included and must be purchased separately to achieve 8K@60Hz or 4K@120Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.