AUBEAMTO
AUBEAMTO 5x1 HDMI 2.0 Switch 4K 60Hz HDR10 IR Remote Black
Connects five HDMI sources to one display at 4K 60 Hz with HDR10 and Dolby Vision, switching by button, IR remote or automatic detection
- ColorBlack
- Connect 5 HDMI sources to one display with button or IR remote
- Enjoy 4K 60 Hz HDR10 and Dolby Vision with 36-bit deep colour
- Automatic switching detects the newly active input instantly
- ITE high-performance chip keeps the signal stable with no loss
- Supports Dolby Atmos, TrueHD, DTS-HD and 3D content
5x1 HDMI 2.0 Switch for Multi-Source Setups
This AUBEAMTO switch routes five HDMI sources to one display using HDMI 2.0 bandwidth up to 18.5Gbps. It handles 4K resolution at 60Hz with HDR10 and Dolby Vision support. HDCP 2.2 compliance ensures protected content plays correctly. An ITE chip provides stable signal transmission without loss.
Suited for Home Theatres Needing Five Inputs
Buyers with five devices such as consoles, streamers or players who want a single cable to the TV will benefit. The IR remote and auto-switching simplify daily use. It is not for users who require picture-in-picture viewing or need to send one source to multiple screens. Systems demanding refresh rates above 60Hz at 4K should look elsewhere.
18.5Gbps Bandwidth Decides 4K 60Hz Capability
The 18.5Gbps maximum data rate determines support for 4K at 60Hz with 36-bit deep colour and RGB 4:4:4 sampling. Lower resolutions including 1080p at 60Hz, 720p and 480p are also supported. Audio formats such as Dolby Atmos, Dolby TrueHD and DTS-HD pass through unchanged.
Highlights
- Connect 5 HDMI sources to one display with button or IR remote
- Enjoy 4K 60 Hz HDR10 and Dolby Vision with 36-bit deep colour
- Automatic switching detects the newly active input instantly
- ITE high-performance chip keeps the signal stable with no loss
- Supports Dolby Atmos, TrueHD, DTS-HD and 3D content
Specifications
| Color | Black |
|---|
Questions about this item
Will the 5 HDMI inputs sit side-by-side on the back of my AV cabinet?
The unit has five HDMI input ports and one output port on its rear panel, so measure the horizontal space to confirm all five cables can connect without crowding.
How do I get the IR remote to change the active input?
Point the remote at the front IR sensor and press the numbered input buttons; the LED indicator shows the selected port.
Will the gold-plated HDMI connectors need cleaning over time?
The gold-plated contacts resist oxidation, so routine cleaning is not required; simply keep the ports dust-free with occasional compressed air.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



