We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 6 ft KVM cable with USB and PS/2 connectors, custom DB15 end

ATEN

ATEN 2L5202UP 6 ft PS/2 to USB KVM Cable

SKU CH-8MX2-AB8N1 MPN 2L5202UP

Connects USB computers to PS/2 KVM switches without adapters, supporting Windows, Mac and Sun Solaris

  • Length6 ft.
  • ColorGray
  • Connectors3
  • FeaturesAllows you to connect your USB computers to existing PS/2 KV
  • Connect USB computers to PS/2 KVM switches without adapters
  • 6 ft length suits typical rack or desk distances
  • Supports Windows, Mac and Sun Solaris operating systems
  • Custom DB15 connector fits ATEN KVM switches directly
  • Plug-and-play operation with no software installation required

PS/2 KVM to USB computer link

This cable connects a USB-equipped computer to an existing PS/2 KVM switch. It uses a custom DB15 connector on the switch side and standard USB on the computer side. No software or adapters are required for operation. The six-foot length suits typical rack or desk deployments.

Windows, Mac and Sun Solaris support

The cable works with Windows, Mac and Sun Solaris hosts attached to compatible ATEN switches. It is not for connecting PS/2 computers to USB KVM switches. Builders needing multi-platform USB-to-USB KVM cabling should look at a different cable type.

Custom DB15 switch connector

The switch end terminates in a proprietary DB15 plug made for ATEN KVM units. This connector decides compatibility; the cable will not fit switches that use standard PS/2 or USB-B switch ports. Verify your switch model accepts this DB15 interface before purchase.

Highlights

  • Connect USB computers to PS/2 KVM switches without adapters
  • 6 ft length suits typical rack or desk distances
  • Supports Windows, Mac and Sun Solaris operating systems
  • Custom DB15 connector fits ATEN KVM switches directly
  • Plug-and-play operation with no software installation required

Specifications

BrandATEN
Model2L5202UP
Length6 ft.
ColorGray
Connectors3
FeaturesAllows you to connect your USB computers to existing PS/2 KVM switches without any adapters
Supports multiple OS such as Windows, Mac, and Sun Solaris
No software installation required, plug the custom made DB15 end of the cable into your
ATEN KVM and plug the USB end of the cable into your USB computer
Shipping weight0.16 kg
Package size161 × 160 × 44 mm

Questions about this item

What DB15 connector does the cable use to attach to the KVM switch?

The cable uses a custom-made DB15 end that plugs directly into compatible ATEN KVM switches.

Which connectors must be plugged in and in what order?

Plug the DB15 end into the KVM switch first, then connect the USB end to the computer; no software installation is required.

When would the cable need to be replaced?

Replace the cable if the connectors become loose, the jacket shows damage, or the link fails to carry video and USB signals reliably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.