We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four soft grey thermal pads 120 by 20 mm 1.5 mm thick

ARCTIC

ARCTIC TP-4 Thermal Pad 120x20mm 1.5mm 4 pcs

SKU CH-C86A-41TDA

Soft thermal pads fill gaps on RAM, chipsets and GPUs to minimise thermal resistance and dampen vibration

  • High performance for RAM, GPUs and consoles
  • Extremely soft 1.5 mm pad bridges uneven surfaces
  • Flexible material dampens vibration on electronic components
  • Easy to cut 120 x 20 mm sheets for custom fit
  • Stackable without performance loss for thicker gaps

Ideal for RAM, chipsets, GPUs and consoles

The ARCTIC TP-4 thermal pad is a high-performance thermal interface material designed for memory modules, chipsets, graphics cards, consoles and laptops. It bridges uneven surfaces with an extremely soft, flexible texture that also dampens vibration. The material is easy to cut to the exact shape required for each application.

1.5 mm thickness in 120 x 20 mm sheets

The single specification that determines fit is the 1.5 mm thickness combined with the 120 x 20 mm sheet dimensions. Each pack contains four pieces that can be stacked without performance loss if a larger gap must be filled. Verify the exact gap height and surface area of your component before ordering.

Low thermal resistance and safe handling

The pad minimises thermal resistance to move heat away from the component efficiently. It is non-conductive and non-capacitive, so accidental contact with surrounding circuitry poses no electrical risk. The soft compound conforms under light pressure, ensuring consistent contact without pumping out over time.

Highlights

  • High performance for RAM, GPUs and consoles
  • Extremely soft 1.5 mm pad bridges uneven surfaces
  • Flexible material dampens vibration on electronic components
  • Easy to cut 120 x 20 mm sheets for custom fit
  • Stackable without performance loss for thicker gaps

Specifications

No published specifications for this item yet.

Questions about this item

How does the 1.5 mm thickness perform once installed between a GPU die and its cooler?

The 1.5 mm pad compresses to fill microscopic gaps, lowering thermal resistance and allowing heat to move efficiently from the die to the heatsink.

What interface standard governs how this pad mates with the component surface?

There is no electrical interface; the pad relies on its extremely soft silicone construction to conform to uneven surfaces and maintain continuous physical contact.

Will the 120 x 20 mm pieces fit a laptop GPU shim without further cutting?

Each piece measures 120 mm by 20 mm, so you can trim the pad to match the exact shim outline using scissors or a craft knife.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.