We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four soft grey thermal pads 120 by 20 mm 1.0 mm thick

ARCTIC

ARCTIC TP-4 Thermal Pad 120x20mm 1.0mm 4 pcs

SKU CH-0N4R-FZNE9

Soft 1.0 mm thermal pad set of four 120×20 mm pieces for RAM, chipsets, GPUs and consoles

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

1.0 mm Thermal Pad for Components

The ARCTIC TP-4 is a 1.0 mm thick thermal pad sized 120 by 20 mm and supplied as a pack of four pieces. It is designed to transfer heat from memory modules, chipsets, graphics cards, consoles and laptops. The material is extremely soft, flexible and vibration-dampening, allowing it to bridge uneven surfaces with minimal thermal resistance.

Suitable for DIY Upgrades and Thin Gaps

This pad suits hobbyists and technicians who need a thin, easy-to-cut interface for small components or tight clearances. It can be stacked without performance loss to achieve a thicker layer when required. Builders looking for a paste-like compound, a thicker single pad or a pre-cut shape for a specific GPU model should consider a different product.

Verify Thickness and Area Before Buying

Measure the gap between the component and the heatsink to confirm that 1.0 mm is the correct thickness for your assembly. Check that the 120 by 20 mm dimensions cover the target surface or can be trimmed to fit. Ensure the mounting pressure will compress the pad evenly across the contact area.

Highlights

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

Specifications

No published specifications for this item yet.

Questions about this item

Do I need to supply my own thermal paste when using the ARCTIC TP-4 pads?

No, the TP-4 pads replace thermal paste entirely; they are pre-cut to 120x20mm at 1.0mm thickness and ready to apply.

Can I stack multiple TP-4 pads to reach a taller gap on an older GPU or console?

Yes, the manufacturer states the pads are stackable without performance loss, so you can combine the 1.0mm sheets to match thicker interfaces.

How can I confirm the pads are making proper contact after installation?

Check that the component temperatures drop under load and that the soft pads have visibly compressed to fill the 1.0mm gap across the 120x20mm surface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.