We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square grey thermal pad sheet 100x100mm 0.5mm thick stackable to 2.0mm

ARCTIC

ARCTIC TP-4 Thermal Pad 100x100x0.5mm Stackable 2.0mm

SKU CH-AADW-2G78G

A 100 mm square silicone pad that compresses from 0.5 mm to 0.3 mm and stacks to 2.0 mm for RAM, GPUs, SSDs and consoles

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Thermal Pad for Components

The ARCTIC TP-4 is a silicone-based thermal pad measuring 100x100 mm with a 0.5 mm thickness. It suits builders servicing RAM, GPUs, laptops, consoles or M.2 SSDs who need a soft, electrically insulating gap filler that dampens vibration and cuts easily to shape.

Compression Limits and Stacking

Each pad compresses from 0.5 mm down to roughly 0.3 mm, reducing thermal resistance while accommodating height differences up to 40 percent. Multiple pads can be stacked to reach a total height of 2.0 mm, but the material is not adhesive so layers rely on mounting pressure to stay in place.

Check Clearance and Surface Before Buying

Verify that the component and heatsink gap falls within the 0.5 mm to 2.0 mm range after compression. Ensure surfaces are clean and free of old compound, and confirm that the mounting hardware can provide even pressure across the pad without exceeding the stack height limit.

Highlights

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Specifications

No published specifications for this item yet.

Questions about this item

Should I use a single 0.5 mm pad or stack several to reach 2.0 mm?

The pads are 0.5 mm thick and designed to be stacked up to 2.0 mm total; choose the stack height that matches the gap you need to fill.

What does the 40 % compression figure mean when the pad is installed?

The material can compress from 0.5 mm to about 0.3 mm, reducing thermal resistance and conforming to uneven surfaces.

Is the pad electrically conductive, and will it short components?

The TP-4 pad is electrically insulating, so it will not cause shorts even if it touches exposed circuitry.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.