We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver thermal paste in a 12g syringe, model 7088

Arctic Silver

Arctic Silver 5 Thermal Paste 12g Model 7088

SKU CH-GYX7-6JMR4

High-density thermal compound with 99.9% pure silver and 88% conductive filler optimises heat transfer for high-power CPUs and heatsinks

  • High thermal transfer backed by 99.9% pure silver particles
  • Dense filler load with over 88% conductive material by weight
  • Stable long-term performance from sub-micron ceramic particles
  • Consistent application via controlled triple-phase viscosity fluid
  • 12 g syringe suited for multiple CPU installations

Precision CPU thermal compound

Arctic Silver 5 is a high-density thermal interface material designed for microprocessor-to-heatsink applications. The 12-gram syringe contains 99.9% pure silver particles in three shapes to maximise contact area. It suits enthusiasts building or servicing high-power CPUs with air or water cooling.

Triple-phase viscosity and stability

The proprietary polysynthetic oil suspension eliminates silicone and delivers controlled triple-phase viscosity for consistent spread during installation. Over 88% thermally conductive filler by weight combines micronized silver with sub-micron zinc oxide, aluminum oxide and boron nitride for long-term performance without pump-out or separation.

Simple syringe dispensing method

The 12g syringe allows direct, controlled application onto the CPU heat spreader before mounting the cooler. No separate tools or mixing are required, and the non-electrically-conductive formula reduces risk if excess compound contacts surrounding components. Clean-up uses standard isopropyl alcohol.

Highlights

  • High thermal transfer backed by 99.9% pure silver particles
  • Dense filler load with over 88% conductive material by weight
  • Stable long-term performance from sub-micron ceramic particles
  • Consistent application via controlled triple-phase viscosity fluid
  • 12 g syringe suited for multiple CPU installations

Specifications

BrandArctic Silver
Model7088

Questions about this item

How do I apply the 12 g syringe of Arctic Silver 5 and what step do people usually miss?

Clean both surfaces with isopropyl alcohol, place a small pea-sized dot in the centre of the CPU heat spreader, then mount the heatsink straight down; the step most users skip is letting the compound settle through a few heat cycles before judging temperatures.

Will the 88 % filler content in Arctic Silver 5 dry out or need replacement later?

The polysynthetic oil carrier is designed for long-term stability and does not contain silicone, so the paste resists drying; typical systems run years without re-application unless the cooler is removed.

At what point does the 99.9 % silver particle load hit its thermal limit under sustained load?

The compound itself remains stable well above normal CPU operating temperatures; the practical limit is the cooler's ability to move heat away, not the paste's conductivity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.