ARCTIC
ARCTIC SDI/HDMI Micro Video Converter 1080P60 12-Bit 3D LUT Loop Out
Converts SDI to HDMI at 1080P60 with 12-bit colour, 16 3D LUTs and SDI loop-out
- Professional SDI to HDMI conversion with loop-through output
- 12-bit colour depth for accurate broadcast-grade video
- Load up to 16 custom 3D LUTs with 17×17×17 precision
- Plug-and-play UVC/UAC support across Windows, macOS and Linux
- Handles 1080p60 signals for live streaming workflows
SDI to HDMI conversion with loop-through
The ARCTIC micro video converter accepts SD, HD and 3G SDI input and outputs HDMI at 1080P60. A built-in SDI loop-through passes the original signal to a second destination without interruption. It is aimed at broadcast and live-streaming workflows that need reliable signal bridging.
12-bit colour and 3D LUT support
Twelve-bit colour depth and the ability to load 16 sets of 17x17x17 3D LUTs give colourists precise grading control. UVC and UAC compliance makes it plug-and-play on Windows, macOS and Linux with major streaming platforms. Buyers who need 4K resolution or higher frame rates should look at other devices.
1080P60 headroom and limits
The converter comfortably handles cine-grade 3G SDI sources up to 1080P60 for monitoring, recording or streaming. It runs out of headroom for 4K, high-frame-rate or HDR pipelines that exceed the 1080P60 ceiling. The SDI loop output adds distribution flexibility without extra splitters.
Highlights
- Professional SDI to HDMI conversion with loop-through output
- 12-bit colour depth for accurate broadcast-grade video
- Load up to 16 custom 3D LUTs with 17×17×17 precision
- Plug-and-play UVC/UAC support across Windows, macOS and Linux
- Handles 1080p60 signals for live streaming workflows
Specifications
No published specifications for this item yet.
Questions about this item
Does the converter need an external power supply or does it draw power from the USB connection?
The device operates over USB with UVC/UAC support, so it draws power directly from the host computer without a separate adapter.
Will the SDI loop-through pass a 3G-SDI signal to my existing monitor while converting to HDMI?
Yes, the SDI loop-through outputs the original SD/HD/3G-SDI signal unchanged while the HDMI port delivers the converted 1080p60 video.
How can I confirm the 3D LUT is applied correctly after loading it in the Ultra Control Utility?
The HDMI output will show the graded image immediately; you can verify the active LUT slot on-screen or via the utility's preview window.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
