We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Syringe of grey thermal paste with cleaner wipes

ARCTIC

ARCTIC MX-7 3.5g with MX Cleaner

SKU CH-BPTA-1MTK0

Premium thermal compound with high filler content for optimal heat transfer, includes cleaner wipes for surface preparation

  • Volume / Net Weight3.5g
  • Specifications8 grams, 10.5 L x 1.2 W x 1.95 H centimeters, 0, ARCTIC, ACT
  • Exceptional heat transfer from high filler content and dense viscosity
  • Consistent performance over time with no pump-out or dry-out
  • Bubble-free thin bond line forms naturally under cooler pressure
  • Safe for CPUs, GPUs, laptops and consoles with zero conductivity
  • Surfaces cleaned for optimal contact using included MX Cleaner wipes

ARCTIC MX-7 3.5g Thermal Paste

ARCTIC MX-7 is a premium thermal compound designed for PC builders and hardware enthusiasts. The 3.5g syringe provides enough material for multiple CPU or GPU applications. It targets users who demand reliable heat transfer for overclocked or high-load systems.

Suits CPUs, GPUs and consoles.

This paste works with processors, graphics cards, laptops and game consoles because it is electrically non-conductive and non-capacitive. The included MX Cleaner pads help remove old compound before application. Buyers who prefer a paste they can spread manually with a spatula should choose a different product.

3.5g net weight decides coverage count

The syringe contains 3.5g of compound, which determines how many installations you can complete. High filler content creates a dense, viscous consistency that resists pump-out and dry-out over repeated thermal cycles. Low adhesion lets the paste distribute evenly under cooler pressure without trapping air bubbles.

Highlights

  • Exceptional heat transfer from high filler content and dense viscosity
  • Consistent performance over time with no pump-out or dry-out
  • Bubble-free thin bond line forms naturally under cooler pressure
  • Safe for CPUs, GPUs, laptops and consoles with zero conductivity
  • Surfaces cleaned for optimal contact using included MX Cleaner wipes

Specifications

BrandArctic
SeriesACTCP00092A
ModelACTCP00092A
Part NumberACTCP00092A
Volume / Net Weight3.5g
Specifications8 grams, 10.5 L x 1.2 W x 1.95 H centimeters, 0, ARCTIC, ACTCP00092A

Questions about this item

What CPU or GPU cooler must I already have installed to use this thermal paste?

Any standard air or liquid cooler that mounts on a CPU or GPU will work; the MX-7 paste fills the microscopic gaps between the cooler base and the chip surface.

Can I apply MX-7 on an older processor that previously used a different thermal compound?

Yes — use the included MX Cleaner wipes to remove all old paste residue first, then apply MX-7; it is non-conductive and safe for legacy CPUs and GPUs.

How do I verify the paste has spread correctly after mounting the cooler?

Remove the cooler and check the contact area: MX-7 should form a thin, even layer without air bubbles because its low adhesion lets it spread naturally under mounting pressure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.