We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four grey rectangular thermal pads on a light background

ARCTIC COOLING

ARCTIC COOLING TP-3 Thermal Pad 120x20mm 1.5mm 4 pcs ACTPD00057A

SKU CH-BYF1-D8QV9

Thermal pad sheet measuring 120 mm by 20 mm and 1.5 mm thick, supplied as a four-piece pack

  • Premium thermal performance for efficient heat transfer
  • 5 mm thickness fits precise component gaps
  • 120 x 20 mm dimensions cover targeted areas
  • Four pads included for multiple applications

ARCTIC TP-3 Thermal Pad Kit

The ARCTIC TP-3 thermal pad kit contains four pre-cut pieces measuring 120 by 20 millimetres with a 1.5 millimetre thickness. It is designed for builders and technicians who need to transfer heat from memory modules, voltage regulators or other board-level components to a heatsink or chassis surface.

Capacity and Headroom

Each pad covers a 120 by 20 millimetre area, so a single piece handles one typical VRM row or memory bank while the four-piece pack covers multiple zones on the same board. The fixed 1.5 millimetre thickness limits use to gaps that match this height; larger gaps or smaller clearances will require a different pad thickness.

Highlights

  • Premium thermal performance for efficient heat transfer
  • 5 mm thickness fits precise component gaps
  • 120 x 20 mm dimensions cover targeted areas
  • Four pads included for multiple applications

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1.5 mm thickness work with the stock cooler mounting pressure on my older GPU?

The 1.5 mm pad compresses under typical cooler mounting pressure to fill gaps between the die and heatsink, so it suits most legacy cards that originally used a similar pad height.

How can I confirm the TP-3 pads are making good contact after I install them?

After mounting the cooler, check that GPU memory temperatures under load drop to the expected range for your model and that the pads show even compression marks when the cooler is removed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.