We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four rectangular thermal pads in light grey packaging

ARCTIC COOLING

ARCTIC COOLING TP-3 Thermal Pad 120x20mm 1.0mm 4 pcs ACTPD00056A

SKU CH-KQMH-ZJ8M8

Thermal pad kit with four 120 × 20 mm pieces at 1.0 mm thickness for GPU and memory cooling

  • Premium thermal conductivity for efficient heat transfer
  • 0 mm thickness ensures optimal contact pressure
  • 120 x 20 mm dimensions fit VRM and memory modules
  • Four pads included for multiple component coverage

ARCTIC TP-3 Thermal Pad 1.0mm Thickness

The ARCTIC TP-3 thermal pad comes in a 120 by 20 millimetre sheet with a 1.0 millimetre thickness. Four pieces are included for multiple applications. It suits builders who need a pre-cut pad for memory modules or voltage regulators. Buyers looking for a liquid metal compound or a thinner gap filler will need a different product.

Thermal Performance and Electrical Safety

The pad transfers heat from components to heatsinks without pumping out. It stays flexible during normal operation and does not conduct electricity. No curing time is required after installation. Users who require the highest possible conductivity for direct-die contact should consider alternative solutions.

Highlights

  • Premium thermal conductivity for efficient heat transfer
  • 0 mm thickness ensures optimal contact pressure
  • 120 x 20 mm dimensions fit VRM and memory modules
  • Four pads included for multiple component coverage

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 120x20mm 1.0mm thermal pad on my GPU or CPU?

Clean both surfaces with isopropyl alcohol, peel the protective film from the pad, cut the 120x20mm sheet to fit the component, place it without stretching, then reassemble the cooler with even pressure.

When will the 1.0mm thermal pad need replacement?

The pad maintains performance for several years; replace it if temperatures rise noticeably or when you disassemble the cooler for cleaning or upgrades.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.