We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four rectangular grey thermal pads 120 by 20 millimetres 1.0 millimetre thick

ARCTIC COOLING

ARCTIC COOLING Thermal Pad Basic 120x20mm 1.0mm Pack of 4

SKU CH-8WZ6-3VB84

Silicone thermal pads measuring 120x20mm at 1.0mm thickness fill gaps between uneven surfaces and provide efficient conductivity without metallic particles

  • Efficient heat transfer with silicone-based filler outperforming generic pads
  • Low hardness and high compressibility fill uneven surfaces and gaps
  • Non-stick design allows easy removal and repositioning for beginners
  • Electrically isolating with no metallic particles prevents short circuits
  • Pack of four pads sized 120x20mm at 1.0mm thickness

Silicone Thermal Pads for Gap Filling

These pads use a silicone base with a special filler to bridge uneven surfaces and close gaps between components. They are electrically isolating and contain no metallic particles, so contact with exposed traces will not cause damage. The pack contains four pieces sized 120 by 20 millimetres at 1.0 millimetre thickness.

Non-Stick Application for Beginners

Each pad is non-stick and can be removed and repositioned during installation without tearing. The low hardness and high compressibility let the material conform to irregular surfaces with light pressure. No tools or thermal paste are required, making the process straightforward for first-time builders.

Sustained Contact Without Pump-Out

The silicone compound resists drying out or migrating away from the contact area over long periods. It maintains consistent conductivity under continuous load rather than degrading after short bursts of heat. The material stays in place without becoming capacitive or conductive over time.

Highlights

  • Efficient heat transfer with silicone-based filler outperforming generic pads
  • Low hardness and high compressibility fill uneven surfaces and gaps
  • Non-stick design allows easy removal and repositioning for beginners
  • Electrically isolating with no metallic particles prevents short circuits
  • Pack of four pads sized 120x20mm at 1.0mm thickness

Specifications

BrandArctic

Questions about this item

How do I confirm the pads are transferring heat correctly after fitting them?

After installation, monitor component temperatures under load; the silicone-based filler should reduce thermal resistance across the 1.0 mm gap compared with generic pads

What does the pack contain and is anything else required?

Four non-stick thermal pads measuring 120 x 20 mm at 1.0 mm thickness; no additional compounds or tools are needed for fitting

Which thickness should I choose for my application?

Select the 1.0 mm version when the gap between the heatsink and component is approximately one millimetre; other thicknesses are not included in this pack

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.